Wright Manufacturing 52083 owner manual Inspection of Mower Do not use, How to start the mower

Page 12

OPERATING INSTRUCTIONS

If you are not completely familiar with the Safety Instruction Manual read it now before proceeding with the operation of the mower. REMEMBER THERE ARE CERTAIN PRECAUTIONS LISTED IN THIS MANUAL THAT YOU MUST NOW TAKE BEFORE STARTING THE MOWER.

Inspect Mower Before Each Use

Inspection of Mower: Do not use the

mower if any parts are not maintained in good operating condition. Examine all moving parts prior to each use. Look for excessive wear, bald drive tires or worn out front tires (normally smooth), cracks in parts, loose or missing bolts, cotter, linchpin or “hair” pins or cable yoke pins and replace before operating the mower. Make sure all safety equipment provided with the mower is in good operating order, including all warning decals and the operator-presence device which stops the engine and blades when the foot-operated Operator Presence Control (OPC) switch is released. To test the OPC, follow the instructions given later in this manual. Inspect the two anti-tip rollers and their respective bolts at the rear of the mower for tightness and proper operation. Ensure that all parts of the Quad-Lever™ control system are tight and secure. This is to reduce the possibility that the mower could have a loss of control or safety.

Basic Operation: The following procedures are to guide you through the basic operation of the mower. You should be a qualified mower operator according to the safety section of this manual. If this is your first time, operation should only be done with the assistance of your dealer on a level area. You should go through each step, in the order indicated, every time you start the mower.

How to start the mower

Before starting the engine

•Make sure the control levers are in the exact neutral position

•Apply the parking brake if it is not already set.

•Turn OFF the blade engaging switch if it is on.

•Turn fuel valve to the “ON” position.

Starting the engine

Electric Start:

•Start the engine according to the engine manufacturer’s recommendation, see engine manual. Set the throttle control lever near mid throttle, pull out on the choke control knob and turn the key to the start position. Do not engage the starter for more than ten

(10)seconds at a time. This may overheat the starter and the wiring systems. Wait ten

(10)seconds between attempts. If the engine does not start after several attempts or stalls frequently, take the mower in for service.

After starting the engine according to the engine manufacturer’s recommendation, push in on the choke control knob to open the choke valve, let the engine run for several minutes to get the hydraulic fluid circulating through the pumps, etc. and to allow the engine to warm up. Do not over-rev a cold engine.

Unusual noises or irregular operation:

As you drive the mower, listen for any unusual noises and test for irregular operation and adjust or service as necessary.

WARNING

CALIFORNIA

Proposition 65 Warning

The engine exhaust from this product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.

How to drive the mower

While standing, both feet should be firmly placed on the foot platform. Set the engine speed about a fourth of the way from idle. Release the parking brake. Now try moving the hand control levers, one at a time, very slightly, forward and backward. Check to see if the wheels move forward and backward according to the position of the levers. If not, check to see that the pump release valves are closed. With both feet still firmly placed on the foot platform, increase the

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Revised 07/2011 Safety Alert Table of Contents Page Pre-Delivery Service of Mower by Dealer Mower is now ready for delivery to your customer General Safety Instructions IntroductionOwner/User Notice User QualificationsRegular Mower Safety Maintenance Inspect Mower Before Each UseWork Area Conditions & Inspection Initial Operating Safety Guidelines Operation In Forward DirectionOperation In Reverse Zero-Radius Turn OperationOperation on Slopes Fuel Safety Using a Spark ArresterReplacement Parts Hydraulic SafetyHow to start the mower How to drive the mowerInspection of Mower Do not use Before starting the engineHow to Stop and Park the Mower How to Adjust NeutralDriving the Mower Over a Curb Mowing on Varying TerrainHow to Perform the Tracking Adjustment Changing the Speed/Sensitivity AdjustmentHow to Test/Use the Blade Clutch/Brake Switch How to Test the Operator Presence Control OPC SwitchService and Adjustments Battery Service Cleaning the MowerSpindle and Drive Pulley Split hub R&R Digital Hour MeterFuel System / Shut-Off Valve Torque Specifications Fuel Evaporation SystemMaintenance Interval Chart Maintenance Record Wright MANUFACTURING, INC. Power Equipment Limited Warranty MANUFACTURER’S Warranty Coverage Warranted Parts 4600X Wedgewood Blvd Frederick, MD

52083 specifications

Wright Manufacturing 52083 is an exceptional piece of equipment that stands out in the landscaping and turf maintenance industry. Known for its durability and efficiency, this model has become a preferred choice for professional landscapers and groundskeepers alike.

One of the main features of the Wright Manufacturing 52083 is its robust design, which is built to withstand the rigors of daily use. The frame is constructed from high-quality materials, ensuring it can handle various terrain types while maintaining stability and traction. This durability translates into a longer lifespan, making it a wise investment for businesses focused on long-term operational success.

The Wright Manufacturing 52083 is equipped with advanced cutting technologies that enable precise and efficient grass trimming. Its blade system is designed to provide a clean cut, promoting healthier grass growth. The cutting height can be easily adjusted, allowing users to customize their mowing experience based on the specific needs of the lawn being serviced. This feature is particularly invaluable for maintaining different grass types and for adapting to various landscaping conditions.

In terms of ease of use, the 52083 model boasts ergonomic controls that enhance user comfort during operation. The intuitive layout of the control panel allows landscapers to operate the machine smoothly without distraction. Additionally, the machine is designed to minimize noise and vibration, creating a more pleasant work environment.

Another noteworthy characteristic is the machine's fuel efficiency. The Wright Manufacturing 52083 incorporates modern engine technology that maximizes power while consuming less fuel. This feature not only reduces operational costs but also contributes to environmental sustainability, a consideration that resonates with many conscientious landscapers today.

Versatility is another strength of the Wright Manufacturing 52083. It is suitable for various applications, from mowing residential lawns to managing larger commercial properties. The compact design allows for easy maneuverability in tight spaces, while the powerful engine provides the capability to handle more extensive areas with ease.

In conclusion, the Wright Manufacturing 52083 stands out due to its robust construction, advanced cutting capabilities, user-friendly features, fuel efficiency, and versatility. It is an excellent choice for professionals seeking a reliable and high-performing lawn maintenance solution that meets the demands of the industry. Whether it is routine landscape maintenance or tackling challenging jobs, the Wright Manufacturing 52083 is engineered to deliver performance and efficiency.
Top Page Image Contents