Wright Manufacturing 52083 manual

Pre-Delivery Service of Mower by Dealer

WARNING

If you are not completely familiar with the Safety Instruction Manual read it now before proceeding with the Pre-Delivery Service of the mower. Only your authorized Wright dealer should perform the Pre-Delivery Service of the mower.

The Wright Stander RH is shipped completely assembled and has been adjusted and tested at the factory. However, due to jostling during the shipping process and the delivery time lapse the following items need to be repeated again before starting the mower. After you have uncrated the mower, follow these procedures in the order indicated:

•Inspect the mower for any damage, unusual conditions or missing parts.

•Inspect the mower for all of its decals, especially the warning decals. There should be one blade warning decal on each side of the deck, the “shield missing” under the blade belt covers, and the dash decal.

•Check (and fill if necessary) engine oil level according to the engine manufacturer’s recommendation.

•Check (and fill if necessary) hydraulic fluid level. Use fully SYNTHETIC oil: Mobil-1 15W-50 (see Hydro Check/Fill section of this manual).

•Check rear tire pressure – 18 – 22 psi. is recommended. Use the higher pressures for heavier operators. Front Casters are equipped with non-pneumatic tires and do not require any air. Lowering tire pressure will affect deck pitch. Always check pitch any time tire pressure is set below recommended pressures.

•Check the battery to see that the cables are tight and connected properly. The battery is 12 volts and is a maintenance-free battery. Only charge the battery if it will not start the mower properly.

•Check the Rapid-Hite deck height adjustment mechanism for proper operation.

•Lubricate all moving parts (see Maintenance Items section of this manual).

•Add regular unleaded gasoline to fuel tank. (use a minimum of 87 octane gasoline) (You may use gasoline containing up to 10% ethanol and gasoline containing up to 5% of methanol.)

•Check brake safety interlock.

Try starting the engine with the parking brake released. (Engine should not start. If engine starts, service the parking brake locking system)

With the hand controls in the middle or neutral position, apply the parking brake.

•Start the engine according to the engine manufacturer’s recommendation. Let the engine run at low - mid RPM for several minutes to ensure the engine oil reaches all of the engine parts and gets the hydraulic fluid circulating through the pumps, etc.

Check if the parking brake locking system prevents the units from being driven while engaged. If not, service the parking brake locking system.

•Release the parking brake. Next, move the hand control levers, one at a time, to make the wheels move in forward and backward rotation.

52083 specifications

Wright Manufacturing 52083 is an exceptional piece of equipment that stands out in the landscaping and turf maintenance industry. Known for its durability and efficiency, this model has become a preferred choice for professional landscapers and groundskeepers alike.

One of the main features of the Wright Manufacturing 52083 is its robust design, which is built to withstand the rigors of daily use. The frame is constructed from high-quality materials, ensuring it can handle various terrain types while maintaining stability and traction. This durability translates into a longer lifespan, making it a wise investment for businesses focused on long-term operational success.

The Wright Manufacturing 52083 is equipped with advanced cutting technologies that enable precise and efficient grass trimming. Its blade system is designed to provide a clean cut, promoting healthier grass growth. The cutting height can be easily adjusted, allowing users to customize their mowing experience based on the specific needs of the lawn being serviced. This feature is particularly invaluable for maintaining different grass types and for adapting to various landscaping conditions.

In terms of ease of use, the 52083 model boasts ergonomic controls that enhance user comfort during operation. The intuitive layout of the control panel allows landscapers to operate the machine smoothly without distraction. Additionally, the machine is designed to minimize noise and vibration, creating a more pleasant work environment.

Another noteworthy characteristic is the machine's fuel efficiency. The Wright Manufacturing 52083 incorporates modern engine technology that maximizes power while consuming less fuel. This feature not only reduces operational costs but also contributes to environmental sustainability, a consideration that resonates with many conscientious landscapers today.

Versatility is another strength of the Wright Manufacturing 52083. It is suitable for various applications, from mowing residential lawns to managing larger commercial properties. The compact design allows for easy maneuverability in tight spaces, while the powerful engine provides the capability to handle more extensive areas with ease.

In conclusion, the Wright Manufacturing 52083 stands out due to its robust construction, advanced cutting capabilities, user-friendly features, fuel efficiency, and versatility. It is an excellent choice for professionals seeking a reliable and high-performing lawn maintenance solution that meets the demands of the industry. Whether it is routine landscape maintenance or tackling challenging jobs, the Wright Manufacturing 52083 is engineered to deliver performance and efficiency.