Wright Manufacturing 26980 Please Be Careful, Introduction, General Safety Instructions

Page 6
SAFETY INSTRUCTION MANUAL

WARNING

This symbol with the word “WARNING” indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

This symbol with the word “CAUTION” indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.

SAFETY INSTRUCTION MANUAL

TO WRIGHT MOWER USERS & OWNERS: READ THIS MANUAL BEFORE USING.

PLEASE BE CAREFUL!

INTRODUCTION

This mower is built to the highest standards in the industry. However, carelessness or operator error may result in serious bodily injury or death. Accident and hazard prevention are dependent upon the awareness, concern, wisdom, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment. Make sure every operator is properly trained and thoroughly familiar with all of the information in this manual before operating the equipment.

GENERAL SAFETY INSTRUCTIONS

The Wright Sentar is designed with your safety in mind. It has the following safety systems with which you should be familiar:

The warning decals on the mower including the instrument panel warning

The blade switch must be “off” before starting the engine

Your feet must be on the foot platform in order to engage the blades

If you remove your feet from the foot platform while the blades are running the engine will stop and the blades will brake in seconds

Letting go of the hand controls will stop the wheels instantly

Spring loaded chute deflector helps reduce trajectory of thrown objects

Belt/pulley covers on cutter deck

Anti-tip rollers are provided at the rear of the mower to minimize the possibility of tipping back and over on the operator

WARNING

Owner/User Notice:

The owner’s/user’s obligation is to instruct themselves and all potential users in the safe operation of this equipment and be sure they read and follow the instructions in this safety manual and other material provided by Wright Manufacturing, Inc. before using or allowing others to operate the equipment. Do not operate this unit unless you carefully read, understand and follow the assembly, installation, and safety instructions contained in this manual and the warning decals provided on the unit. Do not allow other persons to use this unit unless you make sure they carefully read, understand and follow these instructions. Never allow children to operate or play on the unit.

WARNING

User Experience and Qualifications:

This product is designed for use by physically fit, experienced, professional commercial mower operators who have a minimum of 160 hours of experience operating twelve horsepower and greater industrial mowers. Operators must be 18 years or older and weigh at least 120 pounds and no more than 350 pounds They must have read and understood this manual. DO NOT allow children to operate the mower. Do not allow adults to operate the mower without proper instruction mentioned above. Never allow passengers on the mower.

3

Image 6
Contents WARNING READ THIS MANUAL BEFORE USING SAFETY ALERT avoided, could result in death or serious injuryavoided, may result in minor or moderate injury Maintenance Record TABLE OF CONTENTSMaintenance Interval Chart Pre-DeliveryService of Mower by DealerPre-DeliveryService of Mower by Dealer Page INTRODUCTION GENERAL SAFETY INSTRUCTIONSPLEASE BE CAREFUL Owner/User NoticeUser Clothing Scheduled Mower Maintenance SafetyInitial Operating Safety Guidelines Inspection of Mower Before Each UseReplacement Parts Operation on SlopesOperation in Reverse Fuel SafetyOperation During Zero-RadiusTurns Operation in Forward DirectionSAFE AS THE OPERATOR Hydraulic SafetyREMEMBER - YOUR MOWER CAN BE ONLY AS FAILURE TO FOLLOW SAFE OPERATINGHow to start the mower OPERATING INSTRUCTIONSInspection of Mower Do not use the mower How to drive the mowerHow to Adjust Neutral How to Drive the Mower Over a CurbHow to Use the Mower on Varying Terrain Never drive straight onto or off a curbHow to Change the Speed/Sensitivity Adjustment How to Perform the Tracking AdjustmentHow to Test/Use the Blade Clutch/Brake Switch Belt Tension Adjustment Tire Maintenance and PressureDeck Adjustments How to Move the Mower if the Engine Won’t StartBattery Service Cleaning the MowerMaintenance Interval Chart MAINTENANCE ITEMNOTES Date Maintenance RecordMaintenance/Service Performed Unit HoursThis Page Intentionally Left Blank Wright Manufacturing, Inc 4600-XWedgewood Blvd Frederick, MDExclusions 4600X Wedgewood Blvd Frederick, MD