Yard-Man RT65 manual Tire Pressure, Know Your Tiller, Choke Lever, Gear Selection Handle

Page 8

Now move the shift lever to FORWARD (Wheels Forward) position. Carefully engage the clutch by lifting the clutch control bail against the handle. The wheels should spin.

If the wheels do not spin with the unit in forward, adjust by unthreading the tube at the end of the cable a few turns counter-clockwise, (when standing in operator’s position), and then retighten the nut against the tube.

Recheck both adjustments, and readjust as necessary.

NOTE: A secondary cable adjustment is available if you reach the point that additional adjustment is needed. Remove the belt cover and move the hex nuts at the other end of the cable towards the end of the casing. Then readjust the hex nuts at the handle.

TIRE PRESSURE

The tires on your unit may be over-inflated for shipping purposes. Reduce the tire pressure before operating the unit. Recommended operating tire pressure is approximately 20 p.s.i. (check sidewall of tire for tire manufacturer’s recommended pressure).

WARNING: Maximum tire pressure under any circumstances is 30 p.s.i. Equal tire pressure should be maintained on both tires.

SECTION 4: KNOW YOUR TILLER

 

Clutch

Gear

Control

Bail

Selection

 

Handle

 

Height

Adjustment

Lever

 

Clutch

Control

Cable

Rod

 

Cable Tie

Figure 7

CHOKE LEVER

The choke lever is located to the left of the throttle. It is used to enrich the fuel mixture in the carburetor when starting a cold engine. See Engine manual for further information.

GEAR SELECTION HANDLE

The gear selection handle is located in the center of the handle on the tiller. It is used to select NEUTRAL, REVERSE, or one of the FORWARD modes (see below). Pull or push the handle so that the indicator on top of shift cover points to the operating mode desired. See Figure 7.

NEUTRAL—Transmission is in neutral.

REVERSE—Reverse wheel drive.

FORWARD Modes:

Wheels Forward— Forward wheel drive only.

THROTTLE CONTROL

The throttle control lever is located on the engine. It controls the engine speed and stops the engine. See Engine manual for further information.

Tines Reverse— Forward wheel drive and reverse tine drive.

Tines Forward— Forward wheel and tine drive.

WARNING: Make certain unit is in NEUTRAL when starting the engine.

NOTE: If difficulty is encountered in moving the gear selection handle, move the tiller forward or backward slightly to allow the gears to synchronize.

8

Image 8
Contents Operator’s Manual Calling Customer Support Table of ContentsFinding Model Number Important Safe Operation Practices General OperationService ChildrenLoose Parts Attaching Depth Stake Assembly Attaching the Handle AssemblyAssembling Your Tiller To Remove Unit from CartonAttaching the Control ROD Checking the Clutch AdjustmentAttaching the Clutch Cable Tire Pressure Know Your TillerChoke Lever Gear Selection HandleOperating Your Tiller To Operate the Tiller Making AdjustmentsBelt Tension Adjustment Service Carburetor AdjustmentMaintaining Your Tiller EngineTires Cleaning the Tine AreaBelt Replacement OFF-SEASON Storage Parts List for Model Model Description4449 2630 Labels Model Description MANUFACTURER’S Limited Warranty for

RT65 specifications

The Yard-Man RT65 is a versatile and robust lawn tractor designed to meet the mowing and gardening needs of homeowners with medium to large properties. Equipped with a powerful engine and a series of features, it’s built for efficiency and ease of use, ensuring that every cutting session is both productive and enjoyable.

One of the most notable features of the Yard-Man RT65 is its 65-inch cutting deck. This generous size allows for a wider swath of grass to be cut in a single pass, significantly reducing mowing time. The cutting deck is made from durable materials that withstand the rigors of regular use, providing longevity and reliability to the user. The adjustable cutting height feature gives homeowners the ability to customize the grass length according to personal preferences and seasonal requirements.

The RT65 is powered by a robust engine, usually a dependable Briggs & Stratton or a similarly positioned manufacturer. This reliable engine ensures sufficient power to tackle tough mowing tasks, while maintaining fuel efficiency. The tractor is designed with user comfort in mind, featuring an ergonomic seat that provides a comfortable ride even during extended mowing sessions. The controls are intuitively placed, allowing for seamless operation without distraction.

In terms of technology, the Yard-Man RT65 boasts an automatic transmission system, offering a smooth driving experience. This feature allows the mower to adjust its speed seamlessly, making it easier to navigate through varying terrain. The turning radius is also commendable, enabling homeowners to maneuver around tight corners and obstacles in the yard with ease.

Safety features are a priority in the design of the RT65, which typically includes a parking brake and a safety cut-off that stops the blades when the operator leaves the seat. This ensures peace of mind, especially when children or pets are present in the vicinity.

Moreover, the RT65 is compatible with various attachments and accessories. Whether it's a bagger for grass clippings, a snow plow for winter maintenance, or a mulcher for given lawn care treatment, the versatility of this lawn tractor makes it a multi-functional tool for year-round yard work.

In summary, the Yard-Man RT65 combines power, efficiency, and user-friendly features in a compact package. Its impressive cutting capability, reliable engine, and thoughtful design characteristics make it a valuable addition to any homeowner's lawn care arsenal, ensuring well-maintained lawns with minimal effort.