Maintenance And Storage

4.Keep bystanders, helpers, pets, and children at least 75 feet from the machine while it is in operation. Stop the machine if anyone enters the area.

5.Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

6.Exercise extreme caution when operating on or crossing gravel surfaces. Stay alert for hidden hazards or traffic. Do not carry passengers.

7.Never operate the machine at high transport speeds on hard or slippery surfaces.

8.Exercise caution to avoid slipping or falling.

9.Look down, behind, and use care when in reverse or pulling machine towards you.

10.Start the engine according to the instructions found in this manual and keep feet well away from the tines at all times.

11.After striking a foreign object, stop the engine, disconnect the spark plug wire and ground against the engine. Thoroughly inspect the machine for any damage. Repair the damage before starting and operating.

12.Disengage all clutch levers and stop engine before you leave the operating position (behind the handles). Wait until the tines come to a complete stop before unclogging the tines, making any adjustments, or inspections.

13.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

14.Muffler and engine become hot and can cause a burn. Do not touch.

15.Use caution when tilling near fences, buildings and underground utilities. Rotating tines can cause property damage or personal injury.

16.Do not overload machine capacity by attempting to till soil to deep at to fast of a rate.

17.If the machine should start making an unusual noise or vibration, stop the engine, disconnect the spark plug wire and ground it against the engine.

Inspect thoroughly for damage. Repair any damage before starting and operating.

18.Keep all shields, guards and safety devices in place and operating properly.

19.Never pick up or carry machine while the engine is running.

20.Use only attachments and accessories approved by the manufacturer. Failure to do so, can result in personal injury.

21.If situations occur which are not covered in this manual, use care and good judgment. Contact your dealer or telephone 1-800-800-7310 for assistance and the name of your nearest servicing dealer.

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the tines and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or over-speed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer etc.

8.Always refer to the operator’s manual for proper instructions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

NOTE: Not all safety labels shown may apply to your tillers.

454 specifications

The Yard-Man 454 is a standout machine in the realm of outdoor power equipment, designed specifically for the discerning homeowner or landscaper seeking efficiency and power in their lawn care routine. With its robust construction, advanced features, and user-friendly design, the Yard-Man 454 excels in providing a well-manicured lawn with minimal effort.

At the heart of this lawn mower is a powerful 4-cycle engine that delivers impressive torque and performance. It features a 454cc engine, which ensures ample power for tackling even the toughest grass and uneven terrains. The engine is both fuel-efficient and environmentally friendly, providing users with the power they need without excessive fuel consumption or harmful emissions.

One of the standout characteristics of the Yard-Man 454 is its cutting deck. Designed with a 21-inch steel deck, it offers a perfect balance of maneuverability and durability. This size allows for easy navigation around flower beds and obstructions while still providing a substantial cutting area. The adjustable cutting height feature is another significant advantage, offering multiple settings that allow users to customize the lawn cut according to their preferences and seasonal needs.

The mower also encompasses advanced mulching technology, providing an eco-friendly solution to lawn care. It finely chops grass clippings and redistributes them back into the lawn, enriching the soil and promoting healthy grass growth. Furthermore, the discharge feature offers flexibility, allowing users to choose between side discharge or bagging options for convenience.

Ergonomics and ease of use are also integral to the Yard-Man 454’s design. It is equipped with an adjustable handle that provides comfort during extended use, and its lightweight design ensures easy maneuverability. The mower’s compact size allows for effortless storage, making it an ideal choice for homeowners with limited space.

In terms of maintenance, the Yard-Man 454 is designed to simplify the process. The easy-access oil and air filter locations help users perform routine checks and changes without hassle. Additionally, the mower comes with durable wheels that provide excellent traction and stability, even on uneven surfaces.

In summary, the Yard-Man 454 combines power, versatility, and user-friendly features, making it an excellent addition to any lawn care toolkit. With its strong engine, flexible cutting options, and thoughtful design, it ensures that beautiful lawns can be achieved without the burden of complicated technology or strenuous effort.