Yazoo/Kees ZMB142180, ZMB148180, ZMKW48170, ZMKW48190, ZMKW48210, ZMKW52230, ZMKH52230, ZMKW61230

Page 9

SAFETY INSTRUCTIONS

Driving on Slopes

Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip over, which can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if feel unsure, do not mow the slope.

Do as follows:

Remove obstacles such as stones, tree branches, etc.

Mow up and down, not side-to-side.

Never drive the rider on terrain that slopes more than 10°.

6003-004

Avoid starting or stopping on a slope, If the Mow up and down, not side-to-side.tires begin to slip, shut down the blades and

drive slowly down the slope.

Always drive evenly and slowly on slopes.

Make no sudden changes in speed or direc- tion.

Avoid unnecessary turns on slopes, and if it proves necessary, turn slowly and gradually downward, if possible.

Watch out for and avoid driving over furrows, holes, and bumps. On uneven terrain, the machine can tip more easily. Long grass can hide obstacles.

Drive slowly. Use small movements of the

8011-519

steering controls.

Be extra cautious when driving on slopes.

Be extra cautious with any additional equip- ment, which can alter the machine’s stability.

Do not mow near verges, ditches, or banks. The machine can suddenly spin around if a wheel goes over the edge of a drop or ditch, or if an edge gives way.

Do not mow wet grass. It is slippery, and the tires can lose their grip, so that the machine slides.

Try not to stabilize the machine by putting a foot on the ground.

When cleaning the chassis, the machine may never be driven near verges or ditches.

9

Image 9
Contents Manual no REV. IR 09/01/03 Operators manual ModelsPage Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportPresentation PresentationSetup Setup and AdjustmentsAdjustments Cutting HeightReverse Spring Detent Adjustment Stop engine and remove key Mower Deck LevelingThrottle Lever Tension Motion Control Linkage Adjustment Park Brake Adjustment For Models ZBMI42180, ZBMI48180Operating instructions OperationStarting and operation ControlsWhen using this maneuver the machine can Spin very rapidly if one lever is positionedTo far ahead of the other Safety interlock system MaintenanceCutter Housings Engine oilAir filter HardwareHydraulic system Deck beltLubrication Pump beltTire pressure Caster WheelsTorque Specifications Maintenance Schedule Problem Trouble ShootingWiring Diagrams Console Harness Schematic Frame Harness Wiring Diagrams