Adjustments Park Brake, Cutting Height

FIGURE 2

ADJUSTMENTS

PARK BRAKE:

1.Stop engine and remove key. Release park brake and measure the length of the spring. The distance between the washers on each end of the spring should be 2-7/8" (See Fig 2 ).

2.If adjustment is needed, loosen the nut below the spring. Then rotate nut to desired position so the proper distance between the washers is obtained. Check other side for proper adjustment.

3.Engage the brake lever and measure the distance between the trunnion pin and the collar welded to the brake rod. Distance should be 3/16" to 1/4" (See Fig 2 ).

4.If adjustment is needed, loosen the lock nut directly below the yoke. Using a wrench, rotate the rod by turning the double nuts using the nuts below the yoke and the nut you just loosened, to obtain the 3/16" to 1/4" distance. Tighten nut against yoke and check other side

for proper adjustment.

CUTTING HEIGHT:

1.Stop the mower and disengage the blades.

2.Raise the deck height lever to the transport position.

3.Remove the height adjustment pin and place it in the desired cutting height hole. Move deck height lever down onto the pin and mow. NOTE: anti-scalp rollers must be in the proper position for maximum deck floatation. See the decal on the front deck.

MOWER DECK LEVELING:

1.Position mower on a flat surface and stop engine.

2.Check the tire pressure of all four tires. Inflation should be 15 psi.

3.Place two 2x4’s on edge under the cutting deck from front to rear and lower the deck down onto the 2x4’s.

4.Adjust the four upper chain bolts to the center of the slot in the deck lift arms. NOTE: make sure deck lift blocks are tightly bolted to the frame (See Fig 3).

5.Return the deck height lever to the transport position (5" cutting height) and check the center to center distance of the swivels. Distance should be 19-1/2"

6.Check the distance between the washers on the deck lift springs. Distance should be 11-3/4" (See Fig 3).

7.Check chains for equal tension. If unequal, adjust upper chain bolt in slot.

8.Place deck in the 5" cutting height and measure from the cutting edge of the blade to a flat surface to check deck cutting height.

ZKW61233, ZKH52223, ZKW52233, ZKH52253, ZKHP52253 specifications

The Yazoo/Kees ZKHP52233, ZKHP52253, ZKW52233, ZKH61253, and ZKH52253 stand out in the landscape of compact and efficient commercial mowers. These models are designed to meet the demanding needs of landscape professionals, offering a combination of power, precision, and adaptability.

One of the main features of these mowers is their robust engine performance. Each model is equipped with powerful engines that provide consistent torque and speed, enabling them to tackle dense grass and tough terrain efficiently. The engines are engineered for reliability, ensuring that they can operate under heavy loads without compromising performance.

The ZKHP52233 and ZKHP52253 model lines showcase a high-performance hydrostatic drive system. This technology allows for smooth acceleration and responsive handling, making it easier for operators to navigate tight spaces and challenging landscapes. The hydrostatic transmission also contributes to reduced wear and tear, prolonging the lifespan of the mower.

The cutting decks across these models are designed for superior performance. The ZKHP52233 and ZKW52233 feature adjustable cutting heights, providing versatility for different types of grass and landscaping needs. The cutting width is optimized for efficient mowing, allowing operators to cover larger areas in less time while ensuring a clean, even cut.

Ergonomics play an essential role in the design of these mowers. The operator's station is thoughtfully crafted to minimize fatigue during long working hours. Features such as adjustable seats, intuitive controls, and vibration-reducing components enhance user comfort. The ZKH61253 model takes this a step further with a more spacious platform, accommodating operators of various sizes comfortably.

Additionally, the durability of these mowers is notable. Constructed with high-quality materials and reinforced frames, they are built to withstand the rigors of commercial use. The rust-resistant components ensure longevity even when exposed to various weather conditions.

In terms of maintenance, Yazoo/Kees has implemented user-friendly features that simplify regular upkeep. Accessible service points and easy-to-replace parts allow for quick maintenance, ensuring that these mowers run at peak performance day in and day out.

Overall, the Yazoo/Kees ZKHP52233, ZKHP52253, ZKW52233, ZKH61253, and ZKH52253 embody a perfect blend of power, efficiency, and user-centric design. These mowers are tailored to meet the needs of commercial landscapers, providing the tools necessary to excel in a competitive environment while ensuring the highest standards of performance and reliability.