Yazoo/Kees manual Maintenance, Engine oil, Mower blades, Safety interlock system

Page 13

MAINTENANCE

Fuel shut off valve is located at the right rear of the seat. The valve has three positions a right tank, left tank and center is the off position. FIG -

13.NOTE: EFI models the left position is the off position.

Pump release valves located at the right front corner of the pumps. Used to release the system so the machine may be moved by hand when not running. Tilt seat forward to gain access to the pumps. Use a 5/8” wrench to open valve. NOTE: Only rotate valve 1/4 turn to release system.

Fuel Valve

FIG - 13

Maintenance

WARNING: No settings, adjustments or

maintenance is to be made unless: Engine is stopped, key has been removed, park brake is on and battery cable removed from battery.

Annual inspection and maintenance from an authorized Yazoo/Kees dealer is recom- mended to keep your machine in the best condition mechanically and ensures safe operation.

Engine oil

Should be checked daily before starting the machine. See the engine manufacturers manual for specifications on type of oil, filling instruc- tions and service intervals. FIG - 14

Mower blades

Operating

Range

“F” Full Mark

Inspect blades and sharpen or replace as needed. Check blades daily or as needed. Bent, cracked or blades with large notches in them should be replaced. Sharpen to an angle of 22 to 28 degrees. Always check the balance of the blades after sharpening to prevent excessive vibration.

Safety interlock system

Check daily and never operate the machine if the system is not functioning properly. The starter should crank only when the operator is in the seat, the parking brake is applied, blade switch off and the motion control levers in the neutral slots. If the machine starts with any of these controls in an operating position, turn the machine off an repair the system immediately.

FIG - 14

13

Image 13
Contents Manual no REV 04/19/02 Operators manualTechnical Assistance Contents General use and safety rules Safety InstructionsService safety Children safetyDriving on slopes Transportation Presentation PresentationSetup Setup and AdjustmentsAdjustments Cutting HeightMower Deck Leveling Reverse Spring Detent Adjustment Stop engine and remove keyThrottle Lever Tension Motion Control Linkage Adjustment Park Brake AdjustmentOperating instructions Operating InstructionsStarting and operation ControlsOperating Instructions Maintenance MaintenanceSafety interlock system Engine oilAir filter HardwareHydraulic system Deck beltLubrication Pump beltTire pressure Caster WheelsTorque Specifications Maintenance Schedule Problem Possible Causes Trouble ShootingWiring Diagrams Wiring Diagrams Frame Harness Wiring Diagrams EFI Harness

ZVKH52230, ZVKH61250, ZVKE61260, ZVKH61270, ZVKE72260, ZVKH72270, ZVKHL61230, ZVKW52250, ZVKW61230, ZVKW61250 specifications

The Yazoo/Kees models ZVKH52230, ZVKH61250, ZVKE61260, ZVKH61270, ZVKE72260, ZVKH72270, ZVKHL61230, ZVKW52250, ZVKW61230, and ZVKW61250 represent a diverse range of reliable and powerful equipment designed for professional landscaping and turf care. Each model is equipped with a variety of features tailored to meet the needs of both commercial and residential users, ensuring efficiency, durability, and exceptional performance.

Starting with the ZVKH52230, this model is designed with a robust 22-horsepower engine, providing ample power for cutting through dense grass and tough terrain. Its heavy-duty steel construction ensures longevity, while the user-friendly controls make it accessible for operators of all skill levels. Alongside, the ZVKH61250 offers a slightly higher horsepower and a wider cutting deck, enabling faster mowing over larger areas without sacrificing cut quality.

The ZVKE61260 features enhanced ergonomics and operator comfort, with a spacious seating arrangement and intuitive dashboard controls. The model is engineered for stability and maneuverability, making it suitable for navigating tight spots in landscape designs. Similarly, the ZVKH61270 comes equipped with advanced suspension systems, allowing for smooth rides across various terrains, reducing operator fatigue.

For those needing versatility, the ZVKE72260 and ZVKH72270 models are outfitted with interchangeable attachments that add functionality for tasks beyond mowing, such as mulching and bagging. These models emphasize reduced maintenance with easy access points and durable components designed to withstand rigorous use.

The ZVKHL61230 introduces a heavy-duty frame designed for enhanced durability on rugged landscapes, while the ZVKW52250 is tailored for tight residential lawns, combining power with compact design. The ZVKW61230 and ZVKW61250 provide additional options for those requiring greater horsepower and larger cutting widths.

Equipped with advanced engine technologies, all models comply with environmental regulations, ensuring reduced emissions without compromising performance. These Yazoo/Kees machines are built to handle the demands of both professional landscape contractors and homeowners, providing optimal cutting precision, reliability, and overall user satisfaction.

In summary, the Yazoo/Kees ZVKH and ZVK models come equipped with features that prioritize performance, comfort, and versatility, making them exceptional choices for any turf care enthusiast or professional. Whether mowing an expansive lawn or tackling intricate landscaping projects, these models can meet the diverse needs of users in the field.