Yazoo/Kees manual Mower Deck Leveling, Throttle Lever Tension

Page 9

SETUP AND ADJUSTMENTS

Mower Deck Leveling

Position machine on a flat surface. Preferably level concrete.

Check the tire pressure in all four tires. Inflation should be 15 psi.

Place 2x4’s on edge under the cutting deck from front to rear and lower the deck down onto 2x4’s.

Adjust the four lower chain bolts to the center slots on the deck. FIG - 6 NOTE: Make sure the lift blocks under the frame are tightly bolted to the frame.

Check the chains for equal tension. If unequal adjust lower chain bolt in slot.

Place the deck in the 6” cutting height and measure from the cutting edge of the blade to the flat level surface to check the deck cutting height.

Throttle Lever Tension

Stop engine and remove key.

Throttle lever tension may be adjusted by tightening the pivot bolt. The pivot bolt secures the throttle arm to the mounting bracket which is mounted to the console. Access is gained by removing the console.

Rotate the motion control lever out into the neutral slot. While the lever is swung out into the neutral slot pull it against the the back edge of the neutral slot. Holding the lever adjust the spring by sliding the bolt in the slot to remove all the slop and retighten the bolt.

Check your adjustment by repeating the second step in this process.

If no more adjustment is needed reassemble the seat rod to the seat frame.

Deck Lift Arm

Slots For Chain

Adjustment

FIG - 6

Reverse Spring Detent Adjustment Stop engine and remove key.

Pull the motion control lever back to the reverse position and release the lever. When the lever stops it should be in line with the neutral slot, so you can move the lever into neutral slot with out hitting the side of the console frame.

If adjustment is required put the seat in the rear most position on the slide, tilt the seat forward, remove the seat rod from seat frame and fold seat over forward onto the frame.

On the back of the console where the spring is fastened, loosen the 3/8” nut and bolt enough to allow the bolt to slide in the slot. FIG - 7

Reverse Detent

Adjustment Slot

Motion

Reverse Detent

Spring

Control

 

Lever

 

FIG - 7

9

Image 9
Contents Manual no REV 04/19/02 Operators manualTechnical Assistance Contents General use and safety rules Safety InstructionsChildren safety Service safetyDriving on slopes Transportation Presentation PresentationSetup Setup and AdjustmentsAdjustments Cutting HeightReverse Spring Detent Adjustment Stop engine and remove key Mower Deck LevelingThrottle Lever Tension Motion Control Linkage Adjustment Park Brake AdjustmentOperating instructions Operating InstructionsStarting and operation ControlsOperating Instructions Maintenance MaintenanceSafety interlock system Engine oilAir filter HardwareHydraulic system Deck beltLubrication Pump beltTire pressure Caster WheelsTorque Specifications Maintenance Schedule Problem Possible Causes Trouble ShootingWiring Diagrams Wiring Diagrams Frame Harness Wiring Diagrams EFI Harness

ZVKH52230, ZVKH61250, ZVKE61260, ZVKH61270, ZVKE72260, ZVKH72270, ZVKHL61230, ZVKW52250, ZVKW61230, ZVKW61250 specifications

The Yazoo/Kees models ZVKH52230, ZVKH61250, ZVKE61260, ZVKH61270, ZVKE72260, ZVKH72270, ZVKHL61230, ZVKW52250, ZVKW61230, and ZVKW61250 represent a diverse range of reliable and powerful equipment designed for professional landscaping and turf care. Each model is equipped with a variety of features tailored to meet the needs of both commercial and residential users, ensuring efficiency, durability, and exceptional performance.

Starting with the ZVKH52230, this model is designed with a robust 22-horsepower engine, providing ample power for cutting through dense grass and tough terrain. Its heavy-duty steel construction ensures longevity, while the user-friendly controls make it accessible for operators of all skill levels. Alongside, the ZVKH61250 offers a slightly higher horsepower and a wider cutting deck, enabling faster mowing over larger areas without sacrificing cut quality.

The ZVKE61260 features enhanced ergonomics and operator comfort, with a spacious seating arrangement and intuitive dashboard controls. The model is engineered for stability and maneuverability, making it suitable for navigating tight spots in landscape designs. Similarly, the ZVKH61270 comes equipped with advanced suspension systems, allowing for smooth rides across various terrains, reducing operator fatigue.

For those needing versatility, the ZVKE72260 and ZVKH72270 models are outfitted with interchangeable attachments that add functionality for tasks beyond mowing, such as mulching and bagging. These models emphasize reduced maintenance with easy access points and durable components designed to withstand rigorous use.

The ZVKHL61230 introduces a heavy-duty frame designed for enhanced durability on rugged landscapes, while the ZVKW52250 is tailored for tight residential lawns, combining power with compact design. The ZVKW61230 and ZVKW61250 provide additional options for those requiring greater horsepower and larger cutting widths.

Equipped with advanced engine technologies, all models comply with environmental regulations, ensuring reduced emissions without compromising performance. These Yazoo/Kees machines are built to handle the demands of both professional landscape contractors and homeowners, providing optimal cutting precision, reliability, and overall user satisfaction.

In summary, the Yazoo/Kees ZVKH and ZVK models come equipped with features that prioritize performance, comfort, and versatility, making them exceptional choices for any turf care enthusiast or professional. Whether mowing an expansive lawn or tackling intricate landscaping projects, these models can meet the diverse needs of users in the field.