Yazoo/Kees KHKW36140, KHKW48170 important safety instructions Starting and Operation

Page 12

OPERATING INSTRUCTIONS

STARTING AND OPERATION:

1.Making sure the blades are disengaged, ground speed lever in neutral, the thumb latches locked, and the fuel valve on.

2.Adjust throttle to choke (if needed) turn key to on position.

3.Pull start the engine. Once the engine is running adjust the throttle.

4.Holding down at least one of the operator presence levers, engage blades and set RPM to maximum, but not choked. NOTE: Be sure all persons are clear of area before engaging the blades. To prolong spindle bearing and belt life engage and disengage blades at approximately 1\2 throttle.

5.Set the ground speed lever to the desired position.

6.Release the thumb latches at the same time.

MAINTENANCE

1.Engine oil level: Check daily with engine cold and on a flat surface. Remove the dipstick and wipe clean. Reinsert the dipstick all the way,but do not screw down. Remove the dipstick and check oil level. If oil level is low add oil. Use engine manufacturers specs for type of oil.

2.Pump drive belt: Stop engine and remove key. Check the tension on the belt.

3.Mower blades: Stop engine and remove key. Inspect blades and sharpen or replace as needed. Check daily or more often if needed. The machine requires more power with dull blades and gives a poor cut. If blades get bent, replace them. Blades shouldn’t have any notches from hitting objects. The air foil on top of the blade should be sufficient to raise the grass for cutting. If blades are in good condition, sharpen at an angle of 22 to 28 degrees about 2-1/2 inches in from the tips. Note: After sharpening, check blades for proper balance, if needed correct balance to prevent excessive vibration.

4.Safety interlock system: Check daily and never operate the mower if this system is not functioning properly.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operator’s Manual for Page Safety Table of Contents Maintenance Setup and AdjustmentsTrouble Shooting Operating InstructionsSafety Training PreparationOperation Safety Transportation Equipment Setup and AdjustmentsCutting Height Rear Deck Adjustment Motion Control Adjustment CuttingheightadjustmentchartReverse Spring Detent Adjustment Blade Drive Belt Adjustment Auxiliary Blade BeltInterlock Safety System Engine Belt GuidesPump Belt Operating Instructions Controls Starting and Operation Maintenance Cutter Housing Spindle Assemblys When a problem occurs, do not overlook the simple causes Service Record Page

KHKW36140, KHKW48170 specifications

The Yazoo/Kees KHKW36140 and KHKW48170 are exceptional pieces of equipment in the realm of commercial mowing and grounds maintenance. Renowned for their durability and superior engineering, these models cater to a variety of landscaping needs, making them indispensable for professional landscapers and maintenance crews alike.

One of the standout features of these models is their powerful engines. The KHKW36140 is equipped with a robust engine that provides the necessary horsepower to tackle even the most demanding grass cutting tasks. Meanwhile, the KHKW48170, with its higher horsepower rating, is ideal for larger areas and more intensive applications. This ensures that both models can operate efficiently and effectively, regardless of the job size.

Both models boast a heavy-duty construction, designed to withstand the rigors of daily use. Their durable frames and components are built to last, ensuring longevity and a minimal need for repairs. Additionally, they feature a user-friendly design that allows for easy operation and maintenance. The intuitive controls enable operators to maneuver the machines seamlessly, enhancing productivity and reducing fatigue during long working hours.

The cutting decks on the Yazoo/Kees KHKW36140 and KHKW48170 are engineered for precision. The rotary blades provide a clean cut, promoting healthier grass and improving the overall appearance of lawns. With adjustable cutting heights, operators can easily customize the mowing experience to suit different types of grass and terrain, ensuring an adaptable solution for diverse landscaping tasks.

Incorporating advanced technologies, such as hydrostatic transmissions in both models, allows for smooth speed adjustments without the need for shifting gears. This ensures a consistent mowing experience across various terrains, providing excellent traction and control.

Safety features are also paramount in the design of these mowers. The inclusion of emergency shut-off switches and safety interlock systems ensures that operators can work with confidence, knowing that their safety is prioritized.

In summary, the Yazoo/Kees KHKW36140 and KHKW48170 are epitomes of performance and reliability in the mowing industry. With their powerful engines, sturdy construction, precise cutting capabilities, and advanced technologies, these models cater to the needs of professionals seeking efficiency and high-quality results in their landscaping endeavors.
Top Page Image Contents