Safety Transportation | Yazoo/Kees KHKW36140, KHKW48170 manual

SAFETY

TRANSPORTATION:

Turn off fuel valve and strap mower to trailer.

MAINTENANCE:

1.Keep all nuts, bolts and screws tight to keep mower in safe operating condition.

2.Engine maintenance should comply with engine manufactures specifications. See the engine manual for specifications.

3.Never store the mower with gas in the tank inside a building where fumes can reach an open flame or spark.

4.To reduce the risk of fire, keep the mower free of grass, leaves and excessive grease or

oil.

5.Have your mower inspected and serviced each year by an authorized Yazoo/Kees dealer.

6.Use only authentic Yazoo/Kees replacement parts to insure the safety and quality of your mower is maintained.

7.Safety decals should be replaced if they are missing or illegible. Decals can be purchased from your Yazoo/Kees dealer.

8.The hydraulic system including all hoses and fittings should be checked frequently for wear or leaks. Never check for leaks with your hands, use a piece of cardboard or wood. Hydraulic oil under pressure could be injected into your body and must be surgically removed within a few hours.

EQUIPMENT SETUP AND ADJUSTMENTS

1.Uncrate mower

2.Mount front caster assemblies to the front deck using the fasterners provided on the deck.(both sides)

3.Cut the plastic wire ties holding the operator presence levers down.

4.Check tire pressure in all four tires. (rear tires 15 PSI, front tires 20-25 PSI)

5.Check engine oil with dipstick. Add if needed per engine manufactures specifications.(See engine manual)

6.Check hydraulic oil level. Should be an 1.0” below the bottom of the fill tube.

7.Mount the discharge chute to the front deck using the fasteners provided on the deck.

CUTTING HEIGHT

1.Before changine cutting heights make sure the blades are off, key switch is off, and remove spark plug wire or wires.

2.Cutting height ranges from 1 1/2” to 5” in 1/4” increments.

3.Cutting height can be changed three ways. Move one “C” spacer on the front casters, change the blade spacers, or move the wheel motor assemblies.

4.a.To change heights on the rear deck lossen, do not remove, the top two carraige bolts on both sides.(see fig. 1a)

b.Place a jack under the center of the rear deck remove the bottom two nuts on both sides. Then remove the bottom two bolts both sides.(May have to raise the jack slightly to remove bolts.)(see fig. 1b)

c.With the jack raise or lower the rear deck to the desired postion using the chart, on page 7, to ensure proper height.

KHKW36140, KHKW48170 specifications

The Yazoo/Kees KHKW36140 and KHKW48170 are exceptional pieces of equipment in the realm of commercial mowing and grounds maintenance. Renowned for their durability and superior engineering, these models cater to a variety of landscaping needs, making them indispensable for professional landscapers and maintenance crews alike.

One of the standout features of these models is their powerful engines. The KHKW36140 is equipped with a robust engine that provides the necessary horsepower to tackle even the most demanding grass cutting tasks. Meanwhile, the KHKW48170, with its higher horsepower rating, is ideal for larger areas and more intensive applications. This ensures that both models can operate efficiently and effectively, regardless of the job size.

Both models boast a heavy-duty construction, designed to withstand the rigors of daily use. Their durable frames and components are built to last, ensuring longevity and a minimal need for repairs. Additionally, they feature a user-friendly design that allows for easy operation and maintenance. The intuitive controls enable operators to maneuver the machines seamlessly, enhancing productivity and reducing fatigue during long working hours.

The cutting decks on the Yazoo/Kees KHKW36140 and KHKW48170 are engineered for precision. The rotary blades provide a clean cut, promoting healthier grass and improving the overall appearance of lawns. With adjustable cutting heights, operators can easily customize the mowing experience to suit different types of grass and terrain, ensuring an adaptable solution for diverse landscaping tasks.

Incorporating advanced technologies, such as hydrostatic transmissions in both models, allows for smooth speed adjustments without the need for shifting gears. This ensures a consistent mowing experience across various terrains, providing excellent traction and control.

Safety features are also paramount in the design of these mowers. The inclusion of emergency shut-off switches and safety interlock systems ensures that operators can work with confidence, knowing that their safety is prioritized.

In summary, the Yazoo/Kees KHKW36140 and KHKW48170 are epitomes of performance and reliability in the mowing industry. With their powerful engines, sturdy construction, precise cutting capabilities, and advanced technologies, these models cater to the needs of professionals seeking efficiency and high-quality results in their landscaping endeavors.