SUPER MICRO Computer 6015B-8+ manual Chapter Advanced Serverboard Setup, Handling the Serverboard

Chapter 5: Advanced Serverboard Setup

Chapter 5

Advanced Serverboard Setup

This chapter covers the steps required to install processors and heatsinks to the X7DBR-i+/X7DBR-8+ serverboard, connect the data and power cables and install add-on cards. All serverboard jumpers and connections are described and a layout and quick reference chart are included in this chapter. Remember to close the chassis completely when you have fi nished working on the serverboard to protect and cool the system suffi ciently.

5-1 Handling the Serverboard

Static electrical discharge can damage electronic components. To prevent dam- age to printed circuit boards, it is important to handle them very carefully (see Chapter 4). Also note that the size and weight of the serverboard can cause it to bend if handled improperly, which may result in damage. To prevent the serverboard from bending, keep one hand under the center of the board to sup- port it when handling. The following measures are generally suffi cient to protect your equipment from static discharge.

Precautions

•Use a grounded wrist strap designed to prevent static discharge.

•Touch a grounded metal object before removing any board from its antistatic bag.

•Handle a board by its edges only; do not touch its components, peripheral chips, memory modules or gold contacts.

•When handling chips or modules, avoid touching their pins.

•Put the serverboard, add-on cards and peripherals back into their antistatic bags when not in use.

Unpacking

The serverboard is shipped in antistatic packaging to avoid static damage. When unpacking the board, make sure the person handling it is static protected.

5-1