SUPER MICRO Computer 6015B-8+ Extra Universal Serial Bus Headers, Power LED/Speaker, Overheat LED

SUPERSERVER 6015B-T+/6015B-8+ User’s Manual

Extra Universal Serial Bus Headers

Front Panel Universal Serial Bus

Pin Definitions (JUSB2/3)

Four USB headers are located near the SATA ports on the serverboard. JUSB2 includes USB2/3 and JUSB3 is for USB4/5. A USB cable (not included) is needed for the connec- tion. See the table on the right for pin defi nitions.

USB2/4

Pin # Defi nition

1+5V

2PO-

3PO+

4Ground

5 N/A

USB3/5

Pin # Defi nition

1+5V

2PO-

3PO+

4Ground

5 N/A

Power LED/Speaker

On the JDI header, pins 1-3 are for

apower LED, pins 4-7 are for the speaker. See the table on the right for speaker pin defi nitions.

Note: The speaker connector pins are for use with an external speaker. If you wish to use the onboard speaker, you should close pins 6-7 with a jumper.

Speaker Connector

Pin Definitions (JD1)

Pin #	Function	Defi nition
4	+	Speaker data (red wire)
5	Key	No connection

6Key

7Speaker data

ATX PS/2 Keyboard and PS/2 Mouse Ports

The ATX PS/2 keyboard and the PS/2 mouse ports are located on the I/O back plane. See the table on the right for pin defi nitions.

Overheat LED

Connect an LED to the JOH1 header to provide warning of a chassis over- heating condition. See the table on the right for pin defi nitions.

PS/2 Keyboard and

Mouse Port Pin

Definitions (Kb, Mouse)

Pin# Defi nition

1Data

2NC

3Ground

4VCC

5Clock

6 NC

Overheat LED

Pin Definitions (JOH1)

Pin# Defi nition

1+5V

2OH Active

5-16