SUPER MICRO Computer 6015B-8+ manual PCI Expansion Slots, ATI Graphics Controller, Other Features

Chapter 1: Introduction

Note: The operating system you use must have RAID support to enable the hot- swap capability and RAID function of the SCSI drives.

PCI Expansion Slots

Two riser cards have been included with the server to support server PCI expan- sion. The CSE-RR1U-X riser fi ts into the 133 MHz PCI-X slot to support a standard size (full-height, full-length) PCI-X add-on card (any speed). The CSE-RR1U-EL

fits into the PCI-E slot to support one standard size PCI-E add-on card. You may only use one riser card at a time.

ATI Graphics Controller

The X7DBR-i+/X7DBR-8+ features an integrated ATI video controller based on the ES1000 graphics chip. The ES1000 was designed specifi cally for servers, featuring low power consumption, high reliability and superior longevity.

Onboard Controllers/Ports

The X7DBR-i+/X7DBR-8+ provides one fl oppy drive controller and two onboard IDE controllers, which support up to four hard drives or ATAPI devices. Backpanel I/O ports include one COM port, two USB ports, PS/2 mouse and keyboard ports and a video (monitor) port. An Intel 82563EB Ethernet controller is also included to support two Gb LAN ports.

Other Features

Other onboard features are included to promote system health. These include various voltage monitors, two CPU temperature sensors, four fan speed sensors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection and BIOS rescue.

1-3