Chapter 5: Advanced Serverboard Setup
IDE Drive Connectors
There are two IDE connectors: IDE#1 (blue) and IDE#2 (white). IDE#1 is designated as the primary IDE drive. IDE#2 is designated as the secondary IDE drive and is reserved for Compact Flash card use only. See the table below for pin defi nitions.
Note: IDE#2 is reserved for Compact Flash card use only. Do not use it for other devices. If IDE#2 is populated with a Compact Flash card, IDE#1 will only support one device. For the Compact Flash card to work properly, you will fi rst need to connect a power cable to JWF1.
IDE Drive Connectors
Pin Definitions (IDE#1, IDE#2)
Pin# Defi nition
1Reset IDE
3Host Data 7
5 Host Data 6
7 Host Data 5
9Host Data 4
11 Host Data 3
13 Host Data 2
15Host Data 1
17Host Data 0
19Ground
21DRQ3
23I/O Write
25I/O Read
27IOCHRDY
29DACK3
31IRQ14
33Addr1
35 | Addr0 |
37 | Chip Select 0 |
39 | Activity |
Pin # Defi nition
2Ground
4Host Data 8
6 Host Data 9
8 Host Data 10
10 Host Data 11
12 Host Data 12
14 Host Data 13
16Host Data 14
18Host Data 15
20Key
22Ground
24Ground
26Ground
28BALE
30Ground
32IOCS16
34Ground
36 | Addr2 |
38 | Chip Select 1 |
40 | Ground |
