SUPERSERVER
Compact Flash Master/Slave Select
ACompactFlashMaster(Primary)/Slave (Secondary) Select jumper is located at JCF1. Close this jumper to enable the use of a compact fl ash card. For the compact fl ash card and JCF1 to work properly, you will fi rst need to connect the compact fl ash card's power cable to JWF1. See the table on the right for jumper settings.
Compact Flash Card Master/
Slave Select (JCF1)
Jumper Defi nition
Open | Slave (Secondary) | |
Closed | Master (Primary) | |
|
|
SMBUS to PCI Enable/
Disable
The JI2C1 and JI2C2 pair of jumpers al- lows you to connect the System Man- agement Bus to the PCI expansion slots. The default setting is closed (on) for both jumpers to enable the connec- tion. Both connectors must be set the same (JI2C1 is for data and JI2C2 is for the clock). See the table on right for jumper settings.
SMBUS to PCI Enable/Disable (JI2C1/JI2C2)
Jumper Setting | Defi nition | |
Closed | Enabled | |
Open | Disabled | |
|
|
