SUPER MICRO Computer 6015B-8+ manual Connector Definitions

SUPERSERVER 6015B-T+/6015B-8+ User’s Manual

5-8 Connector Definitions

Primary ATX Power

Connector

The primary power supply connector meets the SSI (Superset ATX) 24- pin specifi cation. Make sure that the orientation of the connector is cor- rect. See the table on the right for pin defi nitions.

Auxiliary Power Connector

In addition to the Primary ATX power connector (above), the Secondary 12v 4-pin connector (JPW2) must also be connected to your power supply. See the table on the right for pin defi nitions.

Processor Power Connector

The JPW3 header must also be con- nected to the power supply to provide power for the processor(s). See the table on the right for pin defi nitions.

NMI Button

The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the table on the right for pin defi nitions.

Power LED

The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table on the right for pin defi nitions.

ATX Power 24-pin Connector

Pin Definitions (JPW1)

Pin#	Defi nition			Pin #	Defi nition
13	+3.3V			1	+3.3V
14	-12V				+3.3V
				2
15	COM				COM
				3
16	PS_ON				+5V
				4
17	COM				COM
				5
18	COM				+5V
				6
19	COM				COM
				7
20	Res (NC)				PWR_OK
				8
21	+5V				5VSB
				9
22	+5V			10	+12V
23	+5V			11	+12V
24	COM			12	+3.3V
		+12V 4-pin Power
		Pin Definitions (JPW2)
		Pins	Defi nition
		1 & 2	Ground
		3 & 4	+12V

Processor Power

Pin Definitions (JPW3)

Pins	Defi nition
1 through 4	Ground
5 through 8	+12V

NMI Button

Pin Definitions (JF1)

Pin# Defi nition

19Control

20Ground

Power LED

Pin Definitions (JF1)

Pin# Defi nition

15Vcc

16Control

5-12