SUPER MICRO Computer 6015B-8+ Checking the Drive Bay Setup, 5. Accessing the Inside of the Syatem

Chapter 2: Server Installation

Figure 2-5. Accessing the Inside of the Syatem

(with optional front bezel shown)

2-6 Checking the Drive Bay Setup

Next, you should check to make sure the peripheral drives and the SATA/SCSI drives have been properly installed and all connections have been made.

1.Accessing the drive bays

All drives are accessable from the front of the server. For servicing the DVD- ROM and fl oppy drives, you will need to remove the top chassis cover. The SATA/SCSI drives can be installed and removed from the front of the chassis without removing the top chassis cover or powering down the system.

2.DVD-ROM and floppy disk drives

A slim DVD-ROM and a fl oppy drive should be preinstalled in your server. Refer to Chapter 6 if you need to reinstall a DVD-ROM and/or fl oppy disk drive to the system.

3.Check the SATA/SCSI disk drives

Depending upon your system's confi guration, your system may have one or more drives already installed. If you need to install SATA/SCSI drives, please refer to Chapter 6.

2-9