3 Press the …† buttons to select Audio, then press the OK or √ button.
Audio setup menu will be displayed.
| Audio | |||
No Disc |
|
|
|
|
Programme | Digital Output | : PCM | √ |
|
Setup | DTS | : Off | √ | |
| Dynamic Compression : On | √ | ||
| NICAM | : On | √ | |
|
|
|
|
|
MOVE | OK | RETURN | EXIT | |
|
|
|
|
|
DTS
1. Off : Doesn’t output DTS signal.
Select this when your AV receiver or AV amplifier does not have DTS decoder.
2.On : Outputs DTS Bitstream via digital output when you play DTS track.
Select this only when your AV receiver (or AV amplifier) have DTS decoder.
| ■ When DTS soundtrack is played, sound |
NOTE | does not output from AV Audio Output. |
4 Press the …† buttons to select the desired audio option, then press the OK or √ button.
| Audio | ||
No Disc |
|
|
|
Programme | Digital Output | PCM |
|
Setup | DTS | Bitstream |
|
| Dynamic Compression : On | √ | |
| NICAM | : On | √ |
MOVE | OK | RETURN | EXIT |
5 Press the …† buttons to select the desired item, then press the OK or √ button.
■Press the RETURN or œ button to return to the previous menu.
NOTE
Press the MENU button to exit the menu.
Audio OptionsDigital Output
1.PCM : Select this when you have no equipment that can decode Dolby Digital (or
2.Bitstream : Output Dolby Digital (or
■ Digital output setting is equally applied to
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
1.Off : You can enjoy the movie with the standard Dynamic Range.
2.On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.
1.On : NICAM mode
2.Off : Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.
Setup ystemS
NOTE
both Dolby Digital and
■Be sure to select the correct Digital Output or you will hear no sound or loud noise.
English