Samsung DVD-R128/EUR, DVD-R128/XET, DVD-R128/XEG, DVD-R129/XEG, DVD-R129/XEB manual Video, Sound

Video	Timer Recording
The disc revolves, but no image or bad quality	Timer lamp flickers.
images are displayed.

Checkpoint 1

Checkpoint 2

Checkpoint 3

Checkpoint 4

Be sure that the Video Setting is properly set. (See pages 34-36)

Check whether there is damage to or any foreign material on your disc.

Some low quality discs may not play properly.

If scenes change from dark to bright suddenly, the screen may shake vertically temporarily, but this is not a fault.

Checkpoint 1 Check there is enough space in the disc for recording.

Checkpoint 2 Check whether the current disc is

recordable or not.

Make sure to check before the start time of recording.

Timer recording does not work properly.

Sound

Checkpoint 1	Re-check the recording time and the
	end time settings again.
Checkpoint 2	Recording will be cancelled if the power

No sound.

Checkpoint 1

Are you watching a programme in slow or skip mode?

If you are playing a programme at a speed other than normal or fast 1 speed, sound will not be heard.

is interrupted due to a power failure or

another similar reason while recording.

Checkpoint 2

Checkpoint 3

Checkpoint 4

Check the connections and settings. (See pages 21-22, 32-33)

Check whether the disc is damaged. Clean the disc, if necessary.

Check whether the disc is inserted correctly with the label facing up.

Additional Information

No audio output.

Checkpoint 1 Check whether you have selected the correct digital output options in the Audio Output Options menu.

(See page 33.)

88- English