Case 3 : Component Video output jacks

1.Connect Component video cables(not supplied) between the COMPONENT OUT(Y,PB,PR) jacks on

DVD Recorder and COMPONENT IN(Y,PB,PR) jacks on your TV.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV (or AV amplifier).

(See pages 21-22).

3.After connecting, refer to the page 34 to 35.

●You will enjoy high quality and accurate colour reproduction images.

Other type of connecting the Audio output cable

There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you below.

●Case 1 : Connecting to your TV

●Case 2 : Connecting to a stereo amplifier with AV output jacks

●Case 3 : Connecting to an AV amplifier with a digital output jack

Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of DTS, Inc.

Up Setting & onnectingC

red

blue

green

Case 1 : Connecting to your TV

green

 

 

 

blue

 

 

If your TV has audio input jacks, use this connection.

 

 

 

red

 

 

 

■ Make sure that the colour coded

NOTEconnections match. The Y, PB, PR component output jacks of your DVD Recorder must be connected to the exact corresponding component input jacks on your TV.

■Progressive setting is only available when the Video Out is set to Component.

(See page 34)

yellow

white

red

red

white

yellow

English -21