Samsung DVD-R130/EUR manual Setting up the Progressive scan, Canceling the Progressive scan

Setting up the Progressive scan

If the TV supports Progressive Scan, press the P.SCAN button on the front of the DVD Recorder to enjoy.

1 With the DVD Recorder in Stop mode, press the P.SCAN button on the front of the DVD Recorder.

The message “Press [Yes] to confirm Progressive scan mode. Otherwise press [No]” will appear.

Press [Yes] to confirm Progressive scan mode.

Otherwise press [No]

Yes No

Canceling the Progressive scan

1 With the DVD Recorder in Stop mode, press the P.SCAN button on the front of the DVD Recorder.

The message “Press [Yes] to confirm Interlace scan mode. Otherwise press [No]” will appear.

Press [Yes] to confirm Interlace scan mode.

Otherwise press [No]

Yes No

2 Press the œ √ buttons to select Yes, and then press the OK button.

System Setup

2 Press the œ √ buttons to select Yes, and then press the OK button.

3 Set your TV to Progressive input (using the

3 Set your TV to Interlace input (using the TV remote control.)

■ If you press the P.SCAN button by

TV remote control.)

■ Do not press the P.SCAN button if you

NOTE

mistake when your TV does not support Progressive mode, you need to release the Progressive mode. To release the Progressive mode, press the P.SCAN button on the front panel 2 times.

NOTE

are using a TV that does not support Progressive mode. Nothing will be displayed on the screen if pressed.

The screen will recover after the PS LED on the front panel display turns off.

■Progressive setting is only available when the Video Out is set to Component.

■If the P.SCAN button on the DVD recorder’s front panel is pressed during playback, the prohibition mark( ) appears on the screen.

■Progressive setting is only available when the DVD recorder is in stop mode.

English -35