Plug & Auto Setup
Your DVD Recorder will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your DVD Recorder will then be ready for use.
1 Connect the RF cable as indicated on page
18.
(Connecting Your DVD Recorder to the TV Using the RF Cable and scart cable.)
2 Plug the DVD Recorder into the mains.
“Auto” in the front panel display flickers.
• Refer to following abbreviation table when selecting “Country”.
A(Austria) | NL(Netherlands) | S(Sweden) | PL(Poland) |
B(Belgium) | I(Italy) | CH(Swiss) | CZ (Czech) |
|
|
|
|
DK(Denmark) | N(Norway) | TR(Turkey) | Others |
|
|
|
|
FIN(Finland) | P(Portugal) | GR(Greece) |
|
|
|
|
|
D(Deutschland) | E(Spain) | HU(Hungary) |
|
•The DVD Recorder searches for the stations according to a preset preference list corresponding to the country that you have selected.
6 Auto Channel scan will be started.
Auto channel memory
17%
Stop
•The number of stations automatically stored by the DVD Recorder depends on the number of stations that it has found.
3 Select the language using the …† buttons, then press the OK button.
| Auto Setup | |
No Disc |
|
|
Language Set | English | |
|
| Français |
|
| Deutsch |
|
| Español |
|
| Italiano |
|
| Nederlands |
MOVE | OK | RETURN |
4 Press the OK button or wait for a few seconds to start the auto setup.
Auto Setup |
No Disc
Auto setup will be started.
Check antenna and TV cable connection.
OK 
RETURN
5 Select “Country” using the …†œ √ buttons to select your country then press the OK button.
|
| Auto Setup | |
| Country Selection |
| |
A | NL | S | PL |
B | I | Instal CH | CZ |
DK | N | TR | Others |
FIN | P | GR |
|
D | E | HU |
|
|
|
|
|
MOVE | OK | RETURN |
|
|
|
|
|
7 Check the date and time.
|
| Auto Setup | |
No Disc |
|
|
|
Date |
| Time | Auto Clock |
JAN | 01 | 2006 12 | 00 On |
SUN |
|
|
|
MOVE | OK | RETURN |
|
•if it is : Correct, press the OK button then the date and time will be saved. If you don't press the OK button, the date and time will be saved automatically after 5 seconds.
•if it is : Incorrect, input correct Time, Date, Year using …†œ √ buttons or number buttons. Press the OK button then the date and time will be saved. When you need to change clock setting, you can set up it manually.
(see page 26.)
■ Now, DVD Recorder is ready for use.
NOTE Function for “Plug & Auto Setup” is fixed already. So if you want to change this fixed one, you can change it by Presetting the Stations in OSD “Presetting Channels with the Manual set up function” menu.
(see page 28)
■Auto Setup function can be performed by
pressing and holding down the PROG (
) buttons on the front panel of the DVD Recorder simultaneously for more than 5 seconds with no disc in the DVD Recorder.
English