Yazoo/Kees ZVKH61272, ZVKH72272, ZVKW52252, ZVKW61252, ZVHO61242 Setup and Adjustments, Tires

Page 15

SETUP AND ADJUSTMENTS

WARNING!

No settings or adjustments are to be made unless: Engine is stopped, key has been removed, park brake is on and bat- tery cable removed from battery.

4.Torque all 1/2” hardware to 80 ft./lbs. (110 N•m).

5.Install and tighten knobs against the side post.

Setup

Uncrate machine.

ROPS Assembly

(Roll Over Protection System)

ROPS Assembly Components

1 - Top Loop

1 - Left Side Post

1 - Right Side Post

1 - Hardware Bag

2 - 1/2” Latch Pins w/lanyard

2 - 1/2C x 3 1/4” Cap screws

6 - 1/2C Centerlock Nuts

4 - 1/2C X 4” Cap screws

2 - Knobs

(all hardware Grade 5).

1.Remove roll bar and parts bag from the box.

2.Install roll bar side posts.

a.Locate the LEFT and RIGHT side posts.

b.Slilde the left side post into the left side receiver on the frame, do the same on the right side.

c.Using 1/2C x 3 1/4 cap screws, two per post, align the holes in the side post with the frame receiver.

d.Install the 1/2C centerlock nuts finger tight to the side post bolts.

3.Install roll bar top loop.

a.Align the holes of the top loop with the left and right side posts.

b.Slide the latch pins thru the front hole on the left and right side to connect the top loop to the side posts and secure with the hairpin.

c.Using 1/2C x 3 1/4 cap scrws thru the rear hole on the left and right side.

d.Install the 1/2C centerlock nuts finger tight.

LATCH PIN

TOP LOOP

 

KNOB

1/2C X 3 1/4

 

CAPSCREW

 

 

1/2C CENTERLOCK

 

NUT

 

RIGHT SIDE

 

POST

LEFT SIDE

 

POST

1/2C CENTERLOCK

 

NUTS

1/2C X 4

 

CAPSCREWS

 

Tires

 

Mount rear drive wheels using the lug nuts installed on the hubs.

Check the tire pressure in all four tires. All tires should be 15 psi.

15

Image 15
Contents ZVKH61272 ZVKH72272 ZVKW52252 ZVKW61252 Operators manual ModelsYazoo/Kees Power Equipment. All Rights Reserved Contents Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportCustomer Responsibilities Roll Over Protection SystemPresentation PresentationTires Setup and AdjustmentsRops Assembly Roll Over Protection System Rops Assembly ComponentsEngine Oil AdjustmentsSeat Install Control ArmsFrom rotating tires Motion Control Linkage AdjustmentMower Deck Leveling Throttle Lever TensionPark Brake Adjustment Operating instructions Operating InstructionsFuel Shut Off Key SwitchHour Meter Pump Release ValvesMower blades MaintenanceSafety interlock system Cutter HousingsDeck belt HardwareAir filter Hydraulic systemCaster Wheels Pump beltLubrication Tire pressureTorque Specifications For ZTH Riders Maintenance Maintenance ScheduleProblem Possible Causes Trouble ShootingPage Wiring Diagrams Wiring Diagrams

ZVKH61272, ZVKH72272, ZVKW52252, ZVKW61252, ZVHO61242 specifications

The Yazoo/Kees ZVKH61272, ZVKH72272, ZVKW52252, ZVKW61252, and ZVHO61242 models represent the pinnacle of engineering in the world of commercial mowing equipment. These models are celebrated for their advanced features, technological innovations, and robust performance, making them indispensable tools for landscape professionals and commercial landscapers.

One standout feature in these models is the powerful engine options that ensure reliability and efficiency. The ZVKH series is equipped with heavy-duty engines that deliver exceptional torque and horsepower, providing ample power for tackling the most challenging mowing tasks. The ZVKW series focuses on versatility, allowing operators to switch between various attachments, making them suitable for a wide range of applications including mowing, mulching, and even snow removal.

Another noteworthy aspect of these units is their cutting technology. The ZVKH61272 and ZVKH72272 models utilize high-performance mower decks that are engineered for optimal cutting efficiency. These decks offer multiple height adjustments, allowing operators to achieve precise cuts that can be tailored to different grass types and conditions. The ZVKW52252 and ZVKW61252 models feature advanced mulching capabilities, ensuring that clippings are finely shredded and returned to the soil as natural fertilizer.

Durability is a key characteristic of the Yazoo/Kees lineup. Constructed with high-quality materials, these mowers are built to withstand the rigors of daily use in demanding environments. The cutting decks are reinforced, reducing the likelihood of wear and tear while maintaining superior cutting performance over time.

Operator comfort and safety are also prioritized in these designs. The ZVHO61242 model offers an ergonomically designed seat and easy-to-use control panels, enabling operators to navigate complex landscapes with ease. Safety features such as rollover protection structures (ROPS) and emergency stop switches enhance user protection while working on uneven terrain.

In terms of technology, Yazoo/Kees has integrated innovative solutions that streamline mowing operations. Features such as intuitive controls, GPS navigation, and onboard diagnostics enhance usability and efficiency. The ZVKH and ZVKW series also promote fuel efficiency, allowing operators to complete more jobs with less environmental impact.

With their combination of power, versatility, and user-friendly design, the Yazoo/Kees ZVKH61272, ZVKH72272, ZVKW52252, ZVKW61252, and ZVHO61242 models set a high standard in the mowing industry. They provide reliable performance for both commercial and residential applications, making them an excellent investment for anyone seeking to maintain pristine landscapes.