Yazoo/Kees ZVKH61272, ZVKH72272, ZVKW52252, ZVKW61252, ZVHO61242 manual Mower Deck Leveling

Page 17

SETUP AND ADJUSTMENTS

Mower Deck Leveling

Position machine on a flat surface. Preferably level concrete.

Check the tire pressure in all four tires. Inflation should be 15 psi.

Place 2x4’s on edge under the cutting deck from front to rear and lower the deck down onto 2x4’s.

Loosen the nuts directly behind each ball joint on both rods that connect the pump arm to the mo- tion control assemblies. FIG - 5

Start the engine. The park brake must be engaged and the motion control levers in the neutral slots to start the engine. Run the engine approximately half throttle

Adjust the four lower chain bolts to the center slots

Release park brake to allow the wheels to rotate.

 

on the deck. FIG - 4 NOTE: Make sure the lift

Begin with either side and put the motion control

blocks under the frame are tightly bolted to the

lever into the neutral position.Adjust the motion con-

frame.

trol linkage by rotating the double nuts in the proper

 

Check the chains for equal tension. If unequal

direction until the wheel stops rotating. FIG - 5 Move

adjust lower chain bolt in slot.

the motion control lever forward then into the neutral

Place the deck in the 6” cutting height and mea-

position and place it into the neutral slot. The wheel

must be stopped completely at this point. Now do

sure from the cutting edge of the blade to the flat

the same in reverse and release the lever. The lever

level surface to check the deck cutting height.

should return to neutral on its own.

 

Motion

 

 

Control

Turn Here

 

Lever

Deck Lift Arm

To Adjust

 

Slots For Chain

 

 

Adjustment

 

Pump

 

 

Arm

FIG - 4

 

 

Throttle Lever Tension

 

 

Stop engine and remove key.

 

 

Throttle lever tension may be adjusted by tighten-

Loosen Here

Loosen Here

 

ing the pivot bolt. The pivot bolt secures the throttle

(Lt. Hand Thds.)

 

arm to the mounting bracket which is mounted to

 

 

the console. Access is gained by removing the

FIG - 5

 

console.

 

Run engine full throttle to make sure wheels do

Motion Control Linkage Adjustment

not rotate. Readjust if any rotation occurs.

This adjustment must be made with the rear

 

 

wheels rotating. Raise the rear of the machine

Repeat the whole process for the opposite side

and block it up so the wheels are free to rotate.

and tighten the nuts against the ball joints.

CAUTION: Keep hands, feet and clothing away

 

 

from rotating tires.

Turn machine off.

 

Tilt seat forward and remove the seat rod so the

 

 

 

seat may rotate forward onto the frame.

Reinstall the seat rod and check the wiring har-

 

Place a 2x4 board between the foot plate and the

ness to the seat safety switch for a good connec-

tion and return the seat to the normal position.

center of the seat to engage the seat safety switch.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents ZVKH61272 ZVKH72272 ZVKW52252 ZVKW61252 Operators manual ModelsYazoo/Kees Power Equipment. All Rights Reserved Contents Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsGeneral Use Safety InstructionsSafety Instructions Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportCustomer Responsibilities Roll Over Protection SystemPresentation PresentationRops Assembly Roll Over Protection System Setup and AdjustmentsRops Assembly Components TiresSeat Install AdjustmentsControl Arms Engine OilMower Deck Leveling Motion Control Linkage AdjustmentThrottle Lever Tension From rotating tiresPark Brake Adjustment Operating instructions Operating InstructionsHour Meter Key SwitchPump Release Valves Fuel Shut OffSafety interlock system MaintenanceCutter Housings Mower bladesAir filter HardwareHydraulic system Deck beltLubrication Pump beltTire pressure Caster WheelsTorque Specifications For ZTH Riders Maintenance Maintenance ScheduleProblem Possible Causes Trouble ShootingPage Wiring Diagrams Wiring Diagrams

ZVKH61272, ZVKH72272, ZVKW52252, ZVKW61252, ZVHO61242 specifications

The Yazoo/Kees ZVKH61272, ZVKH72272, ZVKW52252, ZVKW61252, and ZVHO61242 models represent the pinnacle of engineering in the world of commercial mowing equipment. These models are celebrated for their advanced features, technological innovations, and robust performance, making them indispensable tools for landscape professionals and commercial landscapers.

One standout feature in these models is the powerful engine options that ensure reliability and efficiency. The ZVKH series is equipped with heavy-duty engines that deliver exceptional torque and horsepower, providing ample power for tackling the most challenging mowing tasks. The ZVKW series focuses on versatility, allowing operators to switch between various attachments, making them suitable for a wide range of applications including mowing, mulching, and even snow removal.

Another noteworthy aspect of these units is their cutting technology. The ZVKH61272 and ZVKH72272 models utilize high-performance mower decks that are engineered for optimal cutting efficiency. These decks offer multiple height adjustments, allowing operators to achieve precise cuts that can be tailored to different grass types and conditions. The ZVKW52252 and ZVKW61252 models feature advanced mulching capabilities, ensuring that clippings are finely shredded and returned to the soil as natural fertilizer.

Durability is a key characteristic of the Yazoo/Kees lineup. Constructed with high-quality materials, these mowers are built to withstand the rigors of daily use in demanding environments. The cutting decks are reinforced, reducing the likelihood of wear and tear while maintaining superior cutting performance over time.

Operator comfort and safety are also prioritized in these designs. The ZVHO61242 model offers an ergonomically designed seat and easy-to-use control panels, enabling operators to navigate complex landscapes with ease. Safety features such as rollover protection structures (ROPS) and emergency stop switches enhance user protection while working on uneven terrain.

In terms of technology, Yazoo/Kees has integrated innovative solutions that streamline mowing operations. Features such as intuitive controls, GPS navigation, and onboard diagnostics enhance usability and efficiency. The ZVKH and ZVKW series also promote fuel efficiency, allowing operators to complete more jobs with less environmental impact.

With their combination of power, versatility, and user-friendly design, the Yazoo/Kees ZVKH61272, ZVKH72272, ZVKW52252, ZVKW61252, and ZVHO61242 models set a high standard in the mowing industry. They provide reliable performance for both commercial and residential applications, making them an excellent investment for anyone seeking to maintain pristine landscapes.
Top Page Image Contents