Yazoo/Kees KIKW36150, KIKW48150, KIKW48170 manual Technical Assistance

Page 2

Thank you for buying a YAZOO/KEES! Before operating your new mower, read, understand and follow the important safety instructions and the other instructions contained in this manual. Lawn mowers and all power equipment, can be potentially dangerous if used improperly. SAFETY

REQUIRES GOOD JUDGEMENT, CAREFUL USE IN ACCORDANCE WITH INSTRUC- TIONS AND COMMON SENSE.

Congratulations on the purchase of your Yazoo/Kees mower. This manual has been prepared for the owners and operators of the IZT walk-behind commercial mowers. Read, understand and follow the safety and operating instructions.

WARNING

Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering sub- stance.

CAUTION

1.Keep all shields, guards and safety devices in place and in proper working condition.

2.Stop engine and remove spark plug wires or remove key before adjusting, servicing, or per- forming maintenance.

TECHNICAL ASSISTANCE

If you have any questions pertaining to your mower contact your dealer. To locate the nearest dealer please call 1-877-368-8873 or for more information go to our web site at www.yazookees.com.

For technical assistance please write: Yazoo/Kees, 700 Park Street, Beatrice, NE 68310 or

call: 1-877-368-8873.

WARNING: Engine exhaust, some of it’s constituents, and certain vehicle components

contain or emit chemicals known to the State of California to cause cancer and birth defects

or other reproductive harm.

Continuous dedication to improve our products require that specifications and design are sub- ject to change without notice.

2

Image 2
Contents Operator’s Manual Technical Assistance Table of Contents Safety Decals Training SafetyMaintenance PreparationTransportation Cutting Height SET-UPEquipment Cutting Height Adjustment Chart Motion Control Adjustment Tracking AdjustmentsInterlock Safety System Bypass AdjustmentBrake Adjustment Ground Speed Lever FrictionHandle Height Adjustment Operation ControlsBypass Position Drive Brake To Transport Maintenance Blade RemovalDeck Belt Replacement IZT Belt ReplacementCutter Housing Spindle Assembly Spindle AssemblyWinter Storage Maintenance Chart Trouble Shooting Guide