SET-UP
CASTER HEIGHT ADJUSTMENT
MACHINERY
BUSHING
CASTER
1/2" ”C”SWIVEL SPACERS
FIGURE 3
CUTTING HEIGHT ADJUSTMENT CHART
CUTTING | REAR DECK | BLADE | CASTER SPACERS |
HEIGHT | POSITION | SPACERS | ON BOTTOM |
1 1/2 | C | 2 | 0 |
1 3/4 | C | 1 | 0 |
2 | C | 2 | 1 |
2 1/4 | C | 1 | 1 |
2 1/2 | C | 0 | 1 |
2 3/4 | B | 1 | 2 |
3 | B | 2 | 3 |
3 1/4 | B | 1 | 3 |
3 1/2 | B | 0 | 3 |
3 3/4 | B | 1 | 4 |
4 | A | 2 | 5 |
4 1/4 | A | 1 | 5 |
4 1/2 | A | 0 | 5 |
4 3/4 | A | 1 | 6 |
5 | A | 0 | 6 |
NOTE: To quickly achieve small changes in cutting heights, move the spacers from under the cutter housing to the pin on top of the cutting deck. See Figure 4. (Eachspacermovedwillgiveanadditional 1/4" of cutting height ).
NOTE: Blade bolt MUST be torqued to 90 ft./lbs.
USE ONLY 2 BLADE SPACERS MAXIMUM
8