Yard-Man 21A-144R401 manual Important Safe Operation Practices, Training

Page 3

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning.

WARNING: The Engine Exhaust from this product contains chemicals known to the

State of California to cause cancer, birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

Training

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.Keep bystanders, helpers, pets, and children at least 50 feet from the machine while it is in operation. Stop machine if anyone enters the area.

PREPARATION

1.Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks, wire, and other foreign objects which could be tripped over and cause personal injury.

2.Wear sturdy, rough-soled work shoes and close- fitting slacks and shirts. Loose fitting clothes or jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals.

3.Wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards and ear/hearing protection when operating this unit. Wear a face or dust mask if the operation is dusty.

4.This unit has a clutch. The tines remain stationary when the engine is idling. If they do not, have the unit adjusted by an authorized service dealer.

5.Squeeze the throttle control and check that it returns automatically to the idle position.

6.Never leave this machine unattended with the engine running.

7.Never attempt to make any adjustments while engine is running, except where specifically recommended in the operator’s manual.

8.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add while the engine is hot or running.

e.Allow engine to cool at least two minutes before refueling.

f.Never over fill fuel tank. Fill tank to no more than 1/2 inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

i.Never store the machine or fuel container inside where there is an open flame, spark, or pilot light (e.g. furnace, water heater, space heater, clothes dryer, etc.)

j.Allow machine to cool at least 5 minutes before storing.

OPERATION

1.Do not put hands and feet near rotating parts. Contact with the rotating parts can amputate fingers, hands, and feet.

2.Do not operate machine while under the influence of alcohol or drugs.

3.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles.

3

Image 3
Contents OPERATOR’S Manual Table of Contents Training Important Safe Operation PracticesMaintenance And Storage Know Your Cultivator Disconnecting Spark Plug WireSetting Up Your Cultivator Assembling Your CultivatorOperating Your Cultivator Stopping EngineOil Fill-Up Starting a Warm Engine Gas Fill-UpStarting Engine Fuel AdditivesAttaching the Edger Wheel And Blade Using Your CultivatorTine Removal and Replacement Maintaining Your CultivatorEngine Maintenance Checking OilChanging Oil Replacing The Spark Plug Air Filter MaintenanceCarburetor Adjustment Spark Arrestor MaintenanceEngine TroubleshootingModel 21A-144R401 Part Description Model 21A-144R401 Model 21A-144R401 MANUFACTURER’S Limited Warranty for

21A-144R401 specifications

The Yard-Man 21A-144R401 is a versatile and dependable riding lawn mower designed to meet the needs of homeowners seeking efficiency and convenience for their lawn maintenance tasks. With a robust construction and a variety of features, this model stands out in the competitive lawn care market.

One of the key features of the Yard-Man 21A-144R401 is its powerful engine. Equipped with a reliable gas-powered engine, this riding mower provides ample power to tackle even the toughest grass and terrain. The engine is easy to start, ensuring you spend more time mowing and less time fumbling with difficult starting mechanisms.

Another significant characteristic is the mower's cutting deck. The 42-inch deck size strikes a perfect balance between maneuverability and coverage, allowing users to navigate through tight spaces while still efficiently cutting large areas of grass. The deck height is adjustable, offering six different positions to suit various grass types and desired cutting lengths, ensuring a clean and precise cut every time.

The Yard-Man 21A-144R401 is designed with user comfort in mind. It features a high-back seat that provides ample support during longer mowing sessions, along with easy-to-reach controls and a smooth steering system that enhances the overall user experience. The compact design of the mower allows for easy storage and makes it simple to transport.

In terms of technology, this riding mower includes features such as an automatic transmission, which allows for seamless gear transitions. This technology simplifies mowing tasks, as the mower automatically adjusts to the terrain, ensuring a consistent speed and optimal performance no matter the conditions.

Additionally, safety is prioritized in the design of the Yard-Man 21A-144R401. It comes with a set of safety features, such as a blade brake that stops the mower blades when the operator leaves the seat, preventing accidents and ensuring peace of mind during operation.

In summary, the Yard-Man 21A-144R401 is an excellent choice for homeowners looking for an efficient, reliable, and user-friendly riding lawn mower. With its powerful engine, adjustable cutting deck, comfortable seating, and modern technology, this mower is designed to make lawn care tasks easier and more enjoyable. Whether tackling large lawns or smaller landscaped areas, the Yard-Man 21A-144R401 proves to be a dependable companion in every season.