Blade Care, Belt Care | Yard-Man 829 instruction

Blade Care

WARNING: When removing cutting blade for sharpening or replacement, protect your hands with a pair of heavy gloves or use a heavy rag to hold blade.

1.Disconnect spark plug wire from spark plug. Turn mower on its side making sure that the air filter and the carburetor are up.

2.Remove bolt, blade bell support, blade, and blade adapter from the engine crankshaft. See Figure 12.

NOTE: When removing the blade, blade adapter, etc., be careful not to remove or lose parts above it associated with the engine pulley.

3.The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen the blade while it is still on the mower. When sharpening blade, follow original angle of grind. Grind cutting edges equally to keep blade balanced.

4.Remove blade from the adapter for testing balance. Balance the blade on a round shaft screwdriver to check. Remove metal from the heavy side until it balances evenly.

WARNING: An unbalanced blade will cause excessive vibration when rotating at high speeds. It may cause damage to mower, and could break causing personal injury.

Figure 12

Loosen

Screw

Here

Baffle

Figure 13

Maintaining

Your Lawn

Mower

WARNING

When removing the cutting blade for sharpening or replacement or when sliding the belt around it, protect your hands with a pair of heavy gloves

5.Lubricate the engine crankshaft and the inner surface of the blade adapter with light oil. Slide the blade adapter onto the engine crankshaft. Place the blade on the adapter such that the side of the blade marked “Bottom” (or with part number) faces the ground when the mower is in the operating position. Make sure that blade is aligned and seated on blade adapter flanges.

6.Place blade bell support on the blade. Align notches on the blade bell support with small holes in blade. Replace hex bolt and tighten hex bolt to torque: 450 in. lbs. min., 600 in. lbs. max.

To ensure safe operation of your mower, periodically check the blade bolt for correct torque.

Belt Care

1.Disconnect the spark plug wire and ground it against the engine.

2.Drain the fuel tank or place a piece of plastic beneath the cap to prevent gasoline leakage.

3.Tip mower on its side (air cleaner side of engine up).

4.Remove blade, blade adapter, and related hardware as instructed in Blade Care above.

1 2

Figure 14

5.Loosen self-tapping screw that secures deck baffle to the deck. See Figure 13.

6.Working from the rear of the mower, carefully remove belt from transmission pulley.

7.Once belt is off transmission pulley, push down on deck baffle to access engine pulley and slide belt off this pulley and out from under deck. See Figure 14.

8.Replace with new belt, working it between the deck and baffle, first around the transmission pulley and then the engine pulley.

or use a heavy rag to hold the blade.

An unbalanced blade will cause excessive vibration when rotat- ing at high speeds. It may cause damage to mower, and could break causing per- sonal injury.

829 specifications

The Yard-Man 829 is a standout in the realm of outdoor power equipment, particularly recognized for its robust lawn mower design that emphasizes both performance and user comfort. Designed with the residential user in mind, the Yard-Man 829 is equipped with a powerful engine, typically found in 4-cycle models, which offers dependable power to navigate various terrains and grass conditions.

One of the main features of the Yard-Man 829 is its adjustable cutting height. This feature allows users to customize the grass length, adapting to the seasonal growth patterns and personal aesthetic preferences. With multiple settings available, homeowners can easily switch between short and long cuts, ensuring a neat and healthy lawn throughout the year.

The Yard-Man 829 boasts a self-propelled mechanism, which alleviates the strain on the operator, making it an ideal choice for those with larger yards or sloped landscapes. This technology ensures that the mower smoothly glides across the ground, reducing the physical effort required and allowing for more efficient mowing sessions.

Another notable characteristic is its mulching capability. The Yard-Man 829 is designed to finely chop grass clippings and redistribute them back into the lawn. This not only nourishes the soil but also reduces the need for bagging waste, promoting an eco-friendly approach to yard maintenance.

Durability is a key aspect of the Yard-Man 829. Constructed with high-quality materials, the mower can withstand the wear and tear of regular use. Its steel deck is particularly noteworthy, offering a blend of strength and resistance against rust and corrosion, ensuring longevity in various weather conditions.

In terms of user experience, the Yard-Man 829 features ergonomic handles that provide a comfortable grip, minimizing fatigue during operation. Most models also incorporate easy-start technology, allowing for quick and reliable ignition with minimal hassle.

In summary, the Yard-Man 829 is a remarkable lawn mower that combines power, flexibility, and user-friendly features. Its adjustable cutting height, self-propelled system, and mulching capabilities, along with its durable build and comfortable design, make it a solid choice for homeowners looking to maintain a beautiful and healthy lawn with ease. With advancements in design and technology, the Yard-Man 829 stands as a testament to both innovation and practical functionality in the landscaping domain.