Your Responsibility, General Service

7.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

8.Never fuel machine indoors because flammable vapors will accumulate in the area.

9.Never remove gas cap or add fuel while the engine is hot or running. Allow engine to cool at least two minutes before refueling.

10.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide space for fuel expansion.

11.Replace gasoline cap and tighten securely.

12.If gasoline is spilled, wipe it off the engine and equipment. Move unit to another area. Wait 5 minutes before starting the engine.

13.Never store the machine or fuel container inside where there is an open flame, spark or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.

14.To reduce fire hazard, keep mower free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

15.Allow a mower to cool at least 5 minutes before storing.

General Service:

1.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

2.Before cleaning, repairing, or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

3.Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., bent, cracked, worn) Replace blade with the original equipment manufacture’s (O.E.M.) blade only, listed in this manual. “Use of parts which do not

meet the original equipment specifications may lead to improper performance and compromise safety!”

4.Mower blades are sharp and can cut. Wrap the blade or wear gloves, and use extra caution when servicing them.

5.Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.

6.Never tamper with safety devices. Check their proper operation regularly.

7.After striking a foreign object, stop the engine, disconnect the spark plug wire and ground against the engine. Thoroughly inspect the mower for any damage. Repair the damage before starting and operating the mower.

8.Never attempt to make a wheel or cutting height adjustment while the engine is running.

9.Grass catcher components, discharge cover, and trail shield are subject to wear and damage which could expose moving parts or allow objects to be thrown. For safety protection, frequently check components and replace with original equipment manufacturer’s (O.E.M.) parts only, listed in this manual. Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety.

10.Do not change the engine governor setting or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

11.Maintain or replace safety and instruction labels, as necessary.

12.Observe proper disposal laws and regulations. Improper disposal of fluids and materials can harm the environment.

Your Responsibility

•Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

1299 AC

573 specifications

The Yard-Man 573 lawnmower is a remarkable piece of outdoor equipment that offers both power and efficiency for homeowners seeking a dependable tool for maintaining their lawns. With its robust design and thoughtful engineering, the Yard-Man 573 stands out in the crowded market of residential lawn maintenance.

One of the key features of the Yard-Man 573 is its reliable engine. Equipped with a durable gas engine, it delivers ample horsepower to handle various grass types and challenging terrains. This engine ensures consistent performance, even under demanding conditions, allowing users to tackle their mowing tasks with confidence.

The Yard-Man 573 boasts a wide cutting deck, typically around 21 inches, which enhances its ability to cover more ground in less time. This size not only speeds up the mowing process but also provides a clean and even cut. The cutting height can be easily adjusted to cater to different grass lengths and seasonal changes, giving users the flexibility to maintain their lawn as per their preference.

User comfort and convenience are also prioritized in the design of the Yard-Man 573. It features an ergonomic handle that is adjustable, allowing users of different heights to operate the mower comfortably. The foldable handle mechanism makes storage a breeze, saving space in the garage or shed.

Another technological advancement integrated into the Yard-Man 573 is its efficient grass collection system. The mower is equipped with a rear bagger, which effectively collects clippings, minimizing the cleanup effort after mowing. This feature not only helps keep the lawn tidy but also allows for easy disposal of clippings, whether for composting or waste collection.

Safety is a critical aspect of lawnmowers, and the Yard-Man 573 does not disappoint. It is designed with safety features such as a blade brake that stops the blades when the user releases the handle, preventing accidents. Additionally, the mower's sturdy build and reliable materials contribute to longevity and resilience.

In summary, the Yard-Man 573 combines power, efficiency, and user-friendly features to create a lawnmower that meets the demands of both seasoned landscapers and first-time homeowners alike. With its advanced engineering and thoughtful design, it is poised to provide a reliable solution for maintaining a beautiful lawn year after year.