Maintaining Your Lawn Mower | Yard-Man 589 instruction

SECTION 6: MAKING ADJUSTMENTS

WARNING: Do not at any time make any adjustments without first stopping engine and disconnecting spark plug wire.

Cutting Height

Height Adjustment

Lever

•Remove the starter rope from the rope guide.

•Remove the upper handle by removing the hand knobs and carriage bolts. Lay the upper handle out of the way, being careful not to bend or kink cables.

•Remove the hairpin clips from the weld pins on the handle brackets. Refer to Figure 3.

•Remove the carriage bolts and wing nuts from the handle brackets. Press out on the legs of the lower handle. Remove lower handle from the mower.

•Turn the lower handle around so the notch on the bottom of the lower handle is facing forward as shown in Figure 12. Reassemble, placing the bottom holes in the handle over the weld pins in the handle mounting bracket.

Figure 11

An adjusting plate and spring lever at each wheel position provides cutting height adjustment. Each adjusting plate has several height positions.

•Move the spring lever to one of these height positions and the height of cut will be changed. Simply depress the lever towards wheel and move lever assembly to desired position. See Figure 11.

IMPORTANT: All wheels must be placed in the same relative position. For rough or uneven lawns, move the height adjustment lever to a higher position. This will help stop scalping of the grass.

Handle Height

Your mower is shipped with the handle in the higher height position.

Notch

Lower

Handle

Figure 12

•Reassemble the upper handle to the lower handle.

•Place the hairpin clips in the inner holes of the weld pins and replace the carriage bolts and wing nuts on the handle brackets. Attach the starter rope as instructed in the Assembly section.

Engine Adjustments

Refer to the engine manual for details and instructions regarding engine adjustments.

SECTION 7: MAINTAINING YOUR LAWN MOWER

Engine

NOTE: When tipping the unit, empty the fuel tank and keep the spark plug side of engine up. Never tip the mower more than 90 degrees and do not leave the mower tipped for any length of time. Oil can drain into the upper part of the engine causing a starting problem.

Refer to the engine manual for all engine maintenance instructions.

•Maintain engine oil as instructed in the engine manual. Check oil level before starting mower.

•Service air cleaner every 25 hours under normal conditions. Poor engine performance and flooding usually indicate that the air cleaner should be

serviced. To service the air cleaner, refer to the engine manual.

•The spark plug should be cleaned and the gap reset once a season. Spark plug replacement is recommended at the start of each mowing season.

Clean the engine regularly with a cloth or brush. Keep the cooling system (blower housing area) clean to permit proper air circulation which is essential to engine performance and life. Be certain to remove all grass, dirt, and combustible debris from muffler area.

Deck

The underside of the mower deck should be cleaned after each use to prevent a buildup of grass clippings,

589 specifications

The Yard-Man 589 is a robust piece of garden equipment designed to make yard maintenance more efficient and user-friendly. This machine is particularly well-regarded for its blend of power and versatility, catering to both homeowners and landscaping professionals alike.

One of the main features of the Yard-Man 589 is its powerful engine. Equipped with a 190cc engine, it delivers sufficient strength to tackle a variety of grasses and terrain. This substantial power allows the mower to cut through thick, overgrown areas, making it an excellent choice for those with larger properties or untamed gardens.

Another notable feature is its cutting deck, which measures 21 inches. This size strikes a balance between maneuverability and effective coverage, enabling the user to cut a wider area without sacrificing the ability to navigate around obstacles like trees and flower beds. The cutting height is adjustable, providing users with the option to customize the length of grass left after mowing, which is beneficial for promoting healthy grass growth and aesthetics.

The Yard-Man 589 also boasts advanced technology that enhances its performance and ease of use. One such technology is the self-propelled drive system, which considerably reduces the physical effort required to operate the mower. Users can choose their preferred pace, making it easier to manage lawns of varying sizes and slopes. Additionally, the mower’s ergonomic handle design reduces operator fatigue, allowing for longer mowing sessions with less discomfort.

Another characteristic that sets the Yard-Man 589 apart is its multi-functionality. The mower offers options for mulching, side-discharge, and bagging clippings, providing flexibility based on the user's preferred lawn care routine. The mulching feature finely cuts grass clippings that can then return nutrients to the soil, promoting a healthier lawn.

In terms of maintenance, the Yard-Man 589 is designed for easy access to its engine and components, making routine checks and repairs simpler for users. Its durable construction ensures longevity, making it a reliable addition to any homeowner’s lawn care arsenal.

Overall, the Yard-Man 589 stands out for its powerful engine, adjustable features, innovative technology, and user-friendly design, making it a preferred choice for those seeking a high-quality lawn mower that effectively meets their needs. Whether maintaining a picturesque lawn or managing a more rugged landscape, this mower impresses with its capability and ease of use.