Placement | NHT L5 specs

!Placement

The NHT L5 on-wall loudspeaker is designed for on-wall installation into standard 2” x 4” wood studs or joists. Installation in outdoor locations or in moisture-prone inte- rior environments such as indoor swimming pools or saunas is not recommended.

Spend some time considering speaker placement prior to installing the NHT L5 on- wall loudspeaker. Mount the speakers in a location where they face the listening area without obstruction from furniture, and preferably at least three feet from side walls. Below are some fundamental guidelines on speaker orientation:

1)For front left and right main speakers you do not need to “toe-in” the L5s toward the listening area (see the chapter at the end of this manual ‘What is Virtual F.I.G.?’ for explanation); position them facing straight ahead into the room, perpen- dicular to the wall behind the speaker (fig 1).

2)When oriented vertically, the tweeters should be placed inward (fig.2).

3)When using the L5 for a center channel, it should be placed horizontally.

4)When the L5 is placed horizontally, the tweeter orientation (top or bottom) depends on the placement height. If the L5 is placed above the listener’s ear, the tweeter should be below the midrange driver. If the L5 is placed below the listen- er’s ear, the tweeter should be above the midrange driver (fig.3). Whatever the case, the tweeter should be as close to ear level as possible.

5)If you are primarily listening from a position near or against a rear wall, you can place the rear channel speakers as shown in fig 4. Surround processors and receivers have adjustable delay settings that allow you to equalize the arrival times at the listening position. Refer to your Surround Processor/AV Receiver manual to find the correct delay setting.

6)You may mount the L5 horizontally on the wall or ceiling or on a cross beam (fig.5).

Keep in mind that room furnishings play an important role in absorbing and reflect- ing soundwaves. Midrange and high frequencies in particular will be absorbed by soft furnishings such as sofas, carpets and curtains. A large number of these soft furnishings will tend to dull the sound somewhat, while a “live” room with few fur- nishings tends to brighten the sound.

The NHT L5 on-wall loudspeaker is not magnetically shielded. Do not install them in a location where they will be within 12” of a direct view television. Unshielded magnets placed in close proximity to a television screen can cause picture discol- oration and may damage the picture tube. When installing three L5 loudspeakers for front channels in a home theater system, you can position the L & R speakers farther apart to create a wider soundstage. When installing L5 loudspeakers as cen- ter channel speakers, they should be installed at least 12” directly above or below the location where the television will be.

fig.1

fig.2

fig.3

fig.4

fig.5

L5 specifications

The NHT L5 is an iconic loudspeaker model designed for audiophiles who seek high-quality sound reproduction in a compact form. Manufactured by the well-regarded NHT (Now Hear This) brand, the L5 represents a beautiful blend of advanced acoustic engineering and aesthetic design.

One of the standout features of the NHT L5 is its innovative driver design. The speaker employs a 5.25-inch aluminum cone woofer that delivers robust bass performance while maintaining clarity in the midrange. This configuration allows for a frequency response that captures the full spectrum of sound, ensuring that lows, mids, and highs are all rendered with precision. Alongside the woofer, a 1-inch silk dome tweeter contributes to the speaker's extended high-frequency response, providing a smooth and detailed upper range.

The NHT L5's design also prioritizes versatility and ease of integration into various home audio setups. It features a rear-firing port that optimizes low-frequency response, allowing for a more expansive sound stage. This port design enables the L5 to be placed closer to walls without losing significant audio quality, thus integrating seamlessly into different room layouts.

In terms of build quality, the cabinet of the L5 is constructed from high-density MDF, which minimizes resonance and unwanted vibrations. The front baffle is elegantly finished, enhancing its visual appeal, making it a stylish addition to any listening space. The speakers are available in various finishes, allowing consumers to choose an option that best complements their decor.

Another notable characteristic of the NHT L5 is its ability to handle high power levels. With a sensitivity rating of around 87 dB, these speakers can be paired with a wide range of amplifiers, delivering dynamic sound whether at low or high volumes. The L5’s impedance rating of 8 ohms ensures compatibility with most audio equipment available on the market.

Overall, the NHT L5 loudspeakers stand out for their combination of sound quality, build integrity, and aesthetic appeal, making them a compelling choice for music lovers seeking to elevate their listening experience. Whether used in stereo or as part of a home theater setup, the NHT L5 continues to earn accolades for its performance and reliability, making it a respected option in the world of high-fidelity audio.