Operating Your Lawn Mower, Gas and Oil Fill-Up

Cutting Height Adjustment Lever

This lever, located at each wheel, lets you adjust cutting height of the grass. Remember to put all four levers at the same height to avoid uneven cut.

Primer

The primer is used to pump gas into the carburetor. Use it to assist in starting a cold engine, but do not use it when restarting a warm engine after a short shutdown.

Throttle Control

The engine is equipped with a constant speed throttle for maximum engine and cutting performance.

Recoil Starter

The recoil starter is attached to the handle. Stand behind the unit and pull the recoil starter to start engine.

Mulching Plug

The mulching plug is used only for mulching purposes. Instead of collecting the grass clippings in a grass catcher, some mower models have the option of recirculating the clippings back to the lawn. This is called mulching.

SECTION 5: OPERATING YOUR LAWN MOWER

Gas and Oil Fill-Up

WARNING: Never fill fuel tank indoors, or when engine is running or hot. Do not smoke when filling up the fuel tank.

•Service the engine with gasoline and oil as instructed in the separate engine manual packed with your mower. Read instructions carefully.

Before Starting Mower

•Attach spark plug wire to spark plug. Make certain the metal cap on the end of the spark plug wire is fastened securely over the metal tip on the spark plug.

Starting Engine

•Push the primer three times. Wait two seconds between each push. In temperatures below 55° F, prime five times. Do not prime to restart a warm engine after a short shutdown.

•Standing behind the mower, depress the blade control handle and hold it against the upper handle.

WARNING: Be sure no one other than the operator is standing near the lawn mower while starting engine or operating mower.

WARNING: Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

WARNING: Keep hands, feet, hair and loose clothing away from any moving parts on engine and lawn mower.

•Grasp starter handle and pull rope out slowly until engine reaches start of compression cycle (rope will pull slightly harder at this point). Let the rope rewind slowly. Pull rope with a rapid, continuous, full arm stroke. Keeping a firm grip on the starter handle, let the rope rewind slowly.

Stopping Engine

•Release blade control handle to stop the engine and the blade.

•Disconnect spark plug wire and move away from spark plug to prevent accidental starting.

437 specifications

The Yard-Man 437 is a creative solution for homeowners seeking to enhance their outdoor maintenance experience. With its rugged design and powerful performance, it stands out as a reliable tool for tackling various yard tasks. The model boasts a compact size, making it easy to maneuver around tight spaces, while still providing ample cutting power required for efficient lawn care.

One of the main features of the Yard-Man 437 is its robust engine. Equipped with a reliable four-stroke engine, it ensures not only robust performance but also lower emissions, contributing to a cleaner environment. This engine delivers impressive torque, allowing the Yard-Man 437 to handle thick grass and challenging terrain effortlessly.

Another notable characteristic of the Yard-Man 437 is its cutting system. It comes outfitted with a wide cutting deck that can be adjusted for different grass heights. The deck’s sturdy construction can handle rough use while maintaining precision in cutting. Additionally, the model incorporates mulching capabilities, enabling homeowners to recycle grass clippings back into the lawn, promoting healthier soil and reducing waste.

For user convenience, Yard-Man has integrated several modern technologies into the 437. It features an easy-start system that allows for quick ignition, saving precious time on busy mornings. The model also utilizes a self-propelling mechanism, which significantly reduces the physical exertion required during operation, especially on slopes or uneven ground.

The cutting height can be easily modified with just a simple lever adjustment, allowing users to customize their mowing to suit varying grass types and conditions. Moreover, the 437 is designed with comfort in mind. It has an ergonomic handle that provides a comfortable grip and minimizes vibration, enhancing the overall mowing experience.

Durability is another important aspect of the Yard-Man 437. Built with high-quality materials, it is designed to withstand the rigors of regular lawn maintenance. Coupled with its maintenance-friendly design, which allows for easy access to engine components, this model ensures longevity and reliability in performance.

In summary, the Yard-Man 437 is an excellent choice for those seeking a powerful, efficient, and user-friendly lawn mower. Its combination of a robust engine, advanced cutting system, ease of use features, and durable construction make it a standout model in the realm of outdoor power equipment. Whether for small yards or larger properties, the Yard-Man 437 proves itself capable and reliable, delivering optimal results with every use.