White Rodgers 1F97W-71 System Configuration, Operation, Attach Thermostat to Subbase

Page 6

ATTACH THERMOSTAT TO SUBBASE

IT IS RECOMMENDED THAT YOU SET OPTION SWITCHES TO DESIRED POSITION BEFORE ATTACH- ING ON SUBBASE (see OPERATION). IT IS ALSO

RECOMMENDED THAT YOU PROGRAM THE THERMOSTAT WITH BATTERIES INSTALLED BE- FORE ATTACHING ON SUBBASE (see OPERATION GUIDE for programming instructions).

pin connectors and the plastic snaps lock into place (see Fig. 12). Be gentle when attaching thermostat. If the thermostat does not seem to be attaching to the subbase easily, make sure that the connector pins and plastic snaps are properly aligned, and that excess wire is pushed into the wall. Damage to the thermostat may occur if force is used.

!CAUTION

POWER TO THERMOSTAT MUST BE OFF BE- FORE ATTACHING THERMOSTAT TO WALL. FAILURE TO TURN OFF POWER BEFORE AT- TACHING THERMOSTAT MAY CAUSE EQUIP- MENT DAMAGE DUE TO RAPID COMPRESSOR CYCLING.

To attach thermostat to subbase, line up the plastic snap guides at the bottom of the thermostat and the three connector pins on the thermostat with the connectors near the bottom left section of the subbase (when viewed from the front). Gently pivot the thermostat up until the six

ENGAGE TWO LOWER GUIDES;

PIVOT UP

Figure 13. Attaching thermostat to subbase

SYSTEM CONFIGURATION

A. SET GROUP A OPTION SWITCHES

NOTE

ANY TIME GROUP B OPTION SWITCHES ARE CHANGED, THE "AA" BATTERIES MUST BE REMOVED FOR A MINIMUM OF 2 MINUTES. DO NOT REMOVE THE BATTERIES WHEN CHANGING GROUP A OP- TION SWITCHES.

1.Total Keypad Activity

ON

Switch #1 OFF

Switch #2 OFF

12

2.Total Keypad Lockout — All thermostat buttons are disabled.

ON

Switch #1 ON

Switch #2 OFF

1 2

OPERATION

6-pin Connector

Batteries

W14

 

W22

 

(Group A)

 

(Group B)

 

Option Switches

3-pin Connector

Figure 13. Back of Thermostat

B. SET GROUP B OPTION SWITCHES

NOTE

ANY TIME GROUP B OPTION SWITCHES ARE CHANGED, THE "AA" BATTERIES MUST BE REMOVED FOR A MINIMUM OF 2 MINUTES. DO NOT REMOVE THE BATTERIES WHEN CHANGING GROUP A OP- TION SWITCHES.

1.Automatic Changeover (Heating/Cooling Systems Only) — enables thermostat to automatically switch between heating and cooling programs to maintain desired room temperature.

ON

 

 

 

 

 

Switch #1 ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Switch #2 OFF

 

 

 

 

 

 

 

Switch #3 (see step B5)

1

2

3

 

 

 

6

Image 6
Contents Precautions ContentsDescription Route Wires to Location SpecificationsInstallation NEW Installation Select Thermostat LocationRemove OLD Thermostat Replacement InstallationWire Identification Labels Attach Subbase to WallThermostat Move subbase out of the way. Drill mounting holes SET Group B Option Switches System ConfigurationSET Group a Option Switches OperationFAN Operation Check Thermostat OperationElectric Heat Systems Heating SystemTroubleshooting Warranty InformationWarranty Information for Consumers
Related manuals
Manual 40 pages 27.51 Kb

1F97W-71 specifications

The White Rodgers 1F97W-71 is a highly versatile and advanced digital thermostat designed to enhance heating and cooling systems in residential environments. This unit stands out for its blend of modern technology, user-friendly features, and energy efficiency, making it a popular choice among homeowners looking to optimize their indoor climate control.

One of the main features of the 1F97W-71 is its large, easy-to-read touchscreen display. The intuitive interface allows users to effortlessly navigate through settings, making adjustments to temperature and scheduling straightforward. The thermostat provides precise temperature control, ensuring that your home stays comfortable while reducing energy consumption.

This model is equipped with a 7-day programmable schedule, giving users complete control over their heating and cooling patterns. Homeowners can set different temperature settings for each day of the week, allowing for personalized comfort based on their schedules. This feature not only enhances comfort but also contributes to energy savings, as it can automatically reduce heating or cooling when the home is unoccupied.

The 1F97W-71 also incorporates advanced technologies, such as Smart Recovery, which learns how long it takes to reach your desired temperature and starts the heating or cooling process in advance to ensure that your home is at the right temperature at the scheduled times. The thermostat is compatible with various heating and cooling systems, including multi-stage systems, heat pumps, and conventional HVAC setups.

Another notable characteristic of the White Rodgers 1F97W-71 is its Wi-Fi capability. This allows users to remotely access and control their thermostat via a smartphone app, offering the convenience of making adjustments on-the-go. With the app, users can monitor energy usage, receive alerts, and even access weather forecasts to make informed decisions about their home climate.

Energy efficiency is a cornerstone of the 1F97W-71's design. It has ENERGY STAR certification, indicating that it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This certification not only helps contribute to a more sustainable environment but can also lead to significant savings on energy bills over time.

In conclusion, the White Rodgers 1F97W-71 is a feature-rich digital thermostat that combines user-friendly controls, advanced technology, and energy efficiency to provide an optimal home climate solution. Its programmable scheduling, Wi-Fi connectivity, and compatibility with various HVAC systems make it a standout choice for homeowners seeking to enhance their comfort while managing energy costs.