Changing Filter Cycles

FILTRATION

Proper filtration is an important key to maintaining the clarity of your spa's water. The filter system is designed for unsurpassed effectiveness at removing debris and suspensions from the water anytime the water is circulating.

Your control panel is set to filter for two hours every twelve hours. A two speed pump is supplied with your spa that provides fil- tration on low speed, the low speed will shut off if the temperature creeps more than 2 degrees above the set point, it will turn back on when temperature drops to the set point.

The filter cycle begins six (6) minutes after the spa is energized. The second filter cycle begins 12 hours later. filter duration is programmable for 2, 4, 6, 8 hours of for continuous filtration (indicated by FILC). the default filter time is 2 hours.

To program, press “Warm” or “Cool” then Jets1. Press “Warm” or “Cool” to adjust. Press “Jets1” to exit programming.

The blower purges for 30 seconds at the beginning of each filter cycle. The low speed of the pump runs during filtration and the ozone generator (if installed) will be enabled.

Troubleshooting

No power to spa:

1.Check proper connection of to pack

2.Check fuse in pack.

3.Must have very good ground connection - If none call tech support

Trips Breaker:

1.Make sure dedicated line:

2.Check breaker

3.First take note to how long runs before trips

Trips instantly

1.Mis-wired - check electrical wiring

2.Breaker replacement

3.Short in Ozone - unhook to check - call tech support

4.Short in pumps - unhook to check - call tech support

Trip after purge

1. Heater has short - check heater - call tech support

Poor Water Flow:

1.Clean filter

2.Check if adjustable jets (are all open)

3.May have air lock, prime pump by loosening top pump union.

4.If water diverted valves are present make sure they are all the way open.

5.If gate valves are present, make sure they are all the way open.

6.If none of this works possible line obstruction or impeller loose on pump drive shaft

No water or air flow to jet:

1.If adjustable jets, probably in off position. (At times can lock into position, may require some effort.)

2.Pinched line, cutting off flow before reaching spa.

3.Water diverter valve if present may be closed.

Air controls not working:

1.Remove cap on air valve, (with flat head screw driver) and make sure not broken or improper alignment.

2.If internals are broke, call tech support

Vienna specifications

Strong Pools and Spas Vienna is a premier destination for those seeking high-quality pool and spa solutions. Situated in the picturesque Vienna area, this company is renowned for its commitment to craftsmanship, innovation, and customer satisfaction. With a vast array of offerings, Strong Pools and Spas provides residents with everything they need to enhance their outdoor living experience.

One of the key features of Strong Pools and Spas Vienna is their extensive selection of above-ground and inground pools. Each pool is designed to blend seamlessly with the natural surroundings while offering a functional and stylish addition to any backyard. Their pools come in various shapes and sizes, catering to individual preferences and property layouts. The customization options available ensure that every customer can create the perfect oasis for relaxation and recreation.

In addition to pools, Strong Pools and Spas offers an impressive range of hot tubs and spas. These products are crafted with the latest technology to ensure optimal performance, energy efficiency, and durability. The spas feature various jet configurations, adjustable settings, and ergonomic designs, providing an unparalleled relaxation experience. The use of high-quality materials means that these spas are built to withstand the test of time, making them a worthwhile investment for any homeowner.

Another notable aspect of Strong Pools and Spas Vienna is their focus on sustainability and energy efficiency. They offer eco-friendly options, such as solar heating systems and energy-efficient pumps that reduce energy consumption while maintaining optimal water temperature and circulation. This commitment to sustainability not only benefits the environment but also offers customers potential savings on utility bills.

The technology employed by Strong Pools and Spas is cutting-edge, ensuring that every pool and spa operates seamlessly. Advanced filtration systems keep water clean and clear with minimal maintenance. Additionally, smart pool technology allows users to control various functions remotely, including temperature settings, lighting, and filtration schedules, providing convenience and enhancing user experience.

In summary, Strong Pools and Spas Vienna stands out for its dedication to quality, innovation, and customer service. With a broad array of customizable pool and spa options, combined with the latest technologies for energy efficiency and user convenience, they are the go-to destination for anyone looking to elevate their outdoor space.