Strong Pools and Spas The Cyprus manual

Troubleshooting

*indicates qualified service technician recommended

Display flashes “hot” (OVERHEAT)

•This indicates that the heater body is over 112ºF. The system should be shut down in this state and will re-start automatically when the water cools below 112ºF.

Display flashes “HL” (HIGH LIMIT)

•This indicates that either the heater or the spa has reached 118ºF or higher. The system will not re-start automatically. To re-start the system, the water temperature must be below 112ºF and the heater key at the topside control must be pressed.

Display flashes “FLO” (FLOW)

•This indicates that there is a water flow problem or defective pressure switch.

•make sure filters are clean

•check that service valves are open

•check for obstruction of flow

•adjust pressure switch (see pressure switch detail under description and use of controls)

Display flashes “FLC”*

• This indicates that the pressure switch is stuck in the closed position and should be replaced.

Erratic operation at topside panel* •Check for proper connection at J8

•Shut off system and restart

•Check for debris inside topside panel control housing

•Check cable connection at the topside control remove, clean reconnect.

•Try new topside control

•Replace main board

Pump(s), blower or light does not shut off*

•Try new topside control

•Replace main board

Circulation pump does not work*

• Check the fuse and power connections.

Light does not work

•Press Light to turn the light on/off. The Antigua Spa is equipped with an LED Multi-Color Light. The colors will cycle as you press the light button on and off.

Freeze Protect Over-ride FPO

This function is intended to be used on start-up after a fresh fill if water temp is below 52ºF. The 6 hour dura- tion of the FPO cycle is counted from the time the unit is powered-up and not from the time of its activation.

By pressing the Jets 1 and Light key simultaneously for 10 seconds, the freeze protect feature will be suspend- ed for 6 hours. ( the FPO will be activated) This is to allow the installer of the spa to check for normal operation if the spa is filled with water that is less than the set freeze protect level 52ºF. FPO will appear every 10 sec- onds at the topside control. To manually go back to freeze protect mode, power down the system and re-boot. It is recommended that the system be left on low speed and heating in FPO mode.

The Cyprus specifications

Strong Pools and Spas, located in the beautiful locale of Cyprus, is renowned for its exceptional quality and innovative designs in the realm of pool and spa solutions. Catering to both residential and commercial spaces, Strong Pools and Spas offers a comprehensive range of products that combine aesthetics, durability, and cutting-edge technology.

One of the main features of Strong Pools and Spas is their extensive selection of customizable swimming pools. Customers can choose from a variety of shapes, sizes, and depths, ensuring that each pool is tailored to suit individual preferences and site conditions. The design options encompass everything from sleek modern styles to more traditional aesthetics, allowing each installation to blend seamlessly with its surroundings.

The technology utilized in Strong Pools and Spas is among the best in the industry. Their pools are equipped with advanced filtration systems that ensure crystal-clear water while minimizing maintenance requirements. Innovative automation technologies allow users to control heating, lighting, and water features remotely via smartphones or tablets, promoting convenience at the touch of a button. Additionally, eco-friendly options are available, including energy-efficient pumps and solar heating systems, reflecting Strong Pools and Spas' commitment to sustainability.

In terms of spa offerings, Strong Pools and Spas features a range of hot tubs and whirlpools designed for relaxation and rejuvenation. Their spas come with state-of-the-art hydrotherapy jets, ergonomic seating, and mood-enhancing LED lighting, creating a serene oasis right in your backyard. The use of durable materials ensures longevity, while a variety of finish options allows for personalization.

Durability is another cornerstone of Strong Pools and Spas products. Constructed with high-quality materials, their pools and spas are designed to withstand the challenges of the Cypriot climate, ensuring that they remain in prime condition for years to come. This commitment to quality is reflected in strong warranties and customer support, giving clients peace of mind in their investment.

In conclusion, Strong Pools and Spas stands out in Cyprus for its blend of customizable options, advanced technology, and durable construction. Customers seeking to create a tranquil oasis with a beautiful pool or spa will find reliable solutions in Strong Pools and Spas, making their dream of outdoor perfection a reality.