Room Placement

Figure 18

Figure 16

Figure 17

Figure 15

Installation

13.Attach the Column Base to the Loudspeaker Column using the four supplied machine bolts and washers. Re- fer to figure 12.

14.Orient the Loudspeaker Grille with the extended wood trim pointed towards the Column Base and line it up even with top/sides of the Column. Align the Grille fastening pins to the Column

Grommets (there are six pins on each side). Carefully push down

to secure the Grille to the Column. Refer to figure 13.

Optional Feet

15.Two sets of optional feet (fourteen Tiptoes and fourteen Glides) are supplied with the XRT30 Loudspeaker Sys- tem. Refer to figure 16. To

prevent crushing carpet use the Tiptoe Spikes; to protect non-carpeted flooring use the

Chrome Glides. Both the

Glides and Tiptoes have a

threaded shaft and locking nut Tiptoes Glides that screw into the tapped

holes in the bottom of the

XRT30’s base rails. The feet can be independently ad- justed to compensate for uneven flooring. The second set of optional feet are for the Bass Section Cabinet.

16. Stand the Column upright.

Loudspeaker placement in a room can greatly affect performance. The XRT30 Loudspeaker is designed for both Music and Home Theater Systems. The optimal method for selecting speaker locations includes the use of a real time spectrum analyzer operated by an experienced system installer. An uncompromising installation would take into consideration the floor, wall and ceiling coverings, the type and placement of furniture and can even include the architectural design of the room and its construction materials. In those instances where placement in the room is fixed an enviromental equalizer may be needed to restore proper musical balance.

Placement near a wall, corner, floor, ceiling or any in- tersecting surfaces will reinforce some bass frequencies. Which bass frequencies are boosted by placement in a par- ticular location is dependant on the dimensions of the room. Test the various Loudspeaker locations by playing

music with continuous bass, setting up the speakers and listening to them from the main listening spot. Move the Loudspeakers to an alternate location and repeat the listen- ing, paying attention to how the bass qualities and re- sponse levels change. Do not assume the loudest bass is best; rather listen for booming (a lack of articulation), as well as a balance over the whole spectrum, to assure the bass will not drown out the other parts of the music. Ex- periment with various Loudspeaker positions until the lo- cations that sound best are found.

Locating Loudspeakers for use in Home Theater

In a Home Theater application, the placement of Left and Right Front Loudspeakers

can be limited by such

considerations as the size and

location of the video monitor. The locating suggestions in

the “for use in a Music System” section below

can still be helpful as a

starting place. Refer to figure 17.

Locating Loudspeakers for use in a Music System When used in a Music System the distance between the Loudspeakers

and the listener

to the Loudspeakers should form an

isosceles

triangle. If the speakers are too

far apart relative to the listener,

some imaging

can be lost. Refer to figure

18.

XRT30 specifications

The McIntosh XRT30 is a remarkable loudspeaker that embodies the high standards of audio engineering synonymous with the McIntosh brand. Renowned for its advanced technology and exceptional performance, the XRT30 provides a listening experience that caters to audiophiles and music enthusiasts alike.

One of the standout features of the XRT30 is its unique design, which includes a slender, elegant cabinet that minimizes the distortion commonly associated with conventional loudspeakers. This innovative design helps to achieve a more accurate sound reproduction, ensuring that each note is rendered with striking clarity and precision.

The speaker utilizes a proprietary driver array that combines several advanced technologies. The high-frequency section consists of specially designed silk-dome tweeters that provide a smooth and extended response, reaching frequencies up to 40 kHz. This makes for crystal-clear highs that bring out the most intricate details in any recording.

In addition to the high-frequency drivers, the XRT30 is equipped with several midrange drivers arranged in a unique configuration. This array is engineered to create a broad soundstage, allowing listeners to feel immersed in the music. The midrange drivers are vital for delivering the warmth and presence of vocals and acoustic instruments, ensuring that every performance feels dynamic and engaging.

The low-frequency performance of the XRT30 is powered by dual 12-inch woofers. These woofers are optimized for deep bass response and are housed in a carefully calibrated enclosure that enhances their performance. The result is a robust low-end that remains tight and controlled, even at high volume levels.

Overall, the XRT30 is designed to handle high power levels without distortion, thanks to its robust construction and high-efficiency drivers. Each speaker is hand-crafted, reflecting McIntosh’s commitment to excellence in both sound quality and build quality.

With its elegant finish, the XRT30 adds a touch of sophistication to any listening space. The combination of advanced design, quality materials, and meticulous craftsmanship make it a worthy addition to any high-end audio system. For those who seek an unparalleled listening experience, the McIntosh XRT30 presents a compelling option that delivers on both performance and aesthetic appeal.