ENGLISH
SYMBOLS
The following symbols can be found on the ma- chine to remind you of the care and attention that are required during use.
The symbols mean:
Warning! Read the Instruction Book and Safety Manual before using the machine.
Warning! Keep onlookers away. Beware of objects being flung out.
Warning! Keep hands and feet clear of the cutting deck when the machine is running.
PRO 46
Raise the upper part of the handle and place it be- hind the machine. Fold up the lower part of the handle and tighten the locking wheels A (fig. 3).
Then attach the upper part of the handle. There is also a lug on the right hand side for the starter han- dle (fig. 1).
Storage position: Release the locking wheels on the lower part of the handle and fold it forwards. Then release the locking wheels on the upper part of the handle and fold it backwards (fig. 4).
NOTE! Check that the wires are not caught or bro- ken when the handle is unfolded or folded.
CABLE HOLDER
Attach the wires to the cable holder (fig. 5).
Warning! Before starting any repair work, remove the spark plug cable from the spark plugs.
IMPORTANT
Certain models do not have a throttle control. The engine speed is set for optimal function and mini- mal exhaust emissions.
INSTALLATION
HANDLE
Fold up the lower part of the handle.
Then attach the upper part of the handle. This is at- tached with screws, washers and locking wheels (fig. 1).
The handle has four different positions. Release the catch with your foot and set the handle in de- sired position (fig. 2).
1.For normal mowing.
2.For mowing under trees, bushes, etc.
3.Parking position.
4.Delivery and storage position. The handle takes up less space if the knobs are released and the handle folded up.
USING THE MOWER
BEFORE STARTING
FILL THE CRANKCASE WITH OIL
The lawnmower is delivered without any oil in the engine crankcase. The crankcase must be filled with oil before the engine is started for the first time.
Remove the oil dipstick (fig. 6, 7).
Fill the engine’s crankcase with 0.55 litres of good quality oil (service class SE, SF or SG). Use SAE 30 or SAE
Slowly fill to ‘FULL/MAX’. Do not overfill.
CHECK THE OIL LEVEL
Check before using the machine that the oil level is between ‘FULL/MAX’ and ‘ADD/MIN’ on the dipstick (fig. 6, 7). The mower should stand level.
Remove and wipe off the dipstick (fig. 6, 7). Slide it down completely and tighten it. Unscrew and pull it up again. Read off the oil level. If the oil lev- el is low, fill with oil up to the ‘FULL/MAX’ mark.
5