2 - 10 ONline 17-Slot System Concentrator Installation and Operation Guide
Note: The function of the clip is to hold the nut in place behind
the rail. Be sure to install the clip onto the rail so tha t the
nut is centered behind the hole through which you plan to
insert the screw.
4. Place the tray in the rack and atta ch to the clip nuts through the front
of the rack using the four (4) 10-32 x 5/8" truss-head screws and as
shown in Figure 2-3.
Figure 2-3. Cable Tray Installation in Rack
Cable Tray Table Mounting
To install the concentrator on a ta ble top or on a shelf, place the cable tray
on the surface first and then place the concen trator on top of the tray.
Note that the four rubber feet must b e installed on the concentrator before
it is placed on the table top or on top of the cable tray. The feet fit into the
four holes in the cable tray, which p revents the concentrator from moving.