Figure 2-2. Rack Mount Positions
Follow the steps below to mount the cable tray in your rack:
1.Attach the two rack mount flanges to the cable tray in the position you want as shown in Figure
Note: You must tighten the screws completely to be flush with the rack mount flanges so the tray will fit in the rack.
2.Select a vacant position in the rack that is at least 10.5 inches (26.7 cm) from the top of the rack or the next higher unit in the rack.
3.Install the provided clip nuts onto the front of the rack where you want to attach the tray.
Installation and Troubleshooting 2 - 9
