3Com 5017C-LS, 5017C with load sharing Installing ONline Modules, Connecting Network Cables

Warning: DO NOT use a 3-to-2 pronged adapter at the outlet since this may result in electrical shock and does not provide adequate grounding.

Installing ONline Modules

Warning: Only service personnel should install ONline modules.

Install the ONline Controller Module in the concentrator as described in the ONline Controller Module Installation Guide provided with the Controller Module.

Install any ONline media modules in the ONline System Concentrator as described in the manual provided with each module. Note that you do not need to turn off the concentrator when installing additional modules to your concentrator.

Use the chart in Appendix B to label the location of each module in the concentrator. At least one media module must be installed along with the Controller Module to make the concentrator functional.

Connecting Network Cables

Connect the network cables between concentrators, patch panels, and transceivers.

Installation and Troubleshooting 2 - 19