2A
C2300 Rear Panel Connections
MAIN OUTPUTS send signals to a Power Amplifier
MAIN OUTPUTS (Balanced) send signals to a Power Amplifier
OUTPUTS 1 and 2 send signals to
Power Amplifiers and are switched
On/Off with the Front Panel Output
1and 2
OUTPUTS 1 and 2 (Balanced) send signals to Power Amplifiers and are switched On/Off with the Front Panel Output 1 and 2
CDR, CD, D/A and DVD IN- PUTS (Balanced) accept high level program source signals
SRVR OUT sends signals to the input of a recording device
SRVR, CDR, CD, D/A, DVD and TUNER INPUTS accept high level program source signals
GND terminals accept a ground wire from a turntable
Connect the C2300
power cord to a live
AC outlet. Refer to in- formation on the back panel of your C2300 to determine the correct
voltage for your unit
Main Fuse holder, refer to information on the back panel of your C2300 to determine the correct fuse size and rating
MAIN POWER CONTROL Out- put sends a
POWER CONTROL ACC sends
OUTPUT 2 and OUTPUT 1 send
PASSTHRU Power Control Input receives
a
aMcIntosh Home Theater Controller
EXT SENSOR con- | DATA PORTS send | PHONO MM accepts |
nector permits the | signals to McIntosh | signals from a Mov- |
connection of a Mc- | Source Components | ing Magnet Phono |
Intosh IR Sensor for | to allow control with | Cartridge |
remote operation | the C2300 Remote |
|
| Control |
|
PHONO MC accepts the low level signals from a Moving Coil Phono Cartridge
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York | Part No. 04106100 |