Using the Mower, Charging Instructions | Stiga 8211-3417-05 manual

ENGLISH	GB

CHARGING INSTRUCTIONS

The battery must always be charged directly after finishing mowing and as soon as it has cooled down (after about 30 minutes).

1.Charge the battery outside of the mower in a dry and cool place.

2.First connect the round plug from the charger to the battery (fig. 3).

3.Then connect the charger to a wall socket (~220/230V).

4.Charge for 1 - 2 days, depending on how long the machine has been used. Whilst the battery is charging, the red charging lamp on the bat- tery is continuously lit, for as long as the bat- tery charger is connected

5.Finish charging by firstly pulling out the plug from the wall socket.

If the charger is first removed from the battery, the plug leads can short- circuit if they come into contact with conductive material.

CHARGING BEFORE WINTER STORAGE

The battery should always be stored ful- ly charged.

1.Take the battery out of the mower.

2.Carefully wipe off the battery.

3.Store the battery outside of the mower in a dry and cool place.

USING THE MOWER

STARTING/STOPPING THE MOWER

Keep hands and feet well away from the rotating blade(s). Never put your hand or foot under the blade casing or in the grass ejector unit while the motor is running.

1. Fix the battery in place in the mower (fig. 4).

2.Insert the safety key into the control panel (fig. 5). When the safety key is in place, the green lamp will be lit. If it is not, check that the engine protection on the safety key is pressed in (fig. 6) and that the battery is fully charged.

3.Press down the handle to lift the front wheels off the grass, thereby reducing grass resistance in the starting moment.

4.Press in the power on/off button 1 (fig. 7). Start the engine by pressing in the safety handle 2. To stop, release the safety handle.

After finishing mowing:

1.Remove the safety key and keep it out of reach of children.

2.Clean the mower (see the “Maintenance” sec- tion under the heading “Cleaning”).

3.Recharge the battery once it has cooled down (after about 30 minutes).

If the safety handle has stopped work- ing, remove the safety key and take the mower to an authorised service work- shop to be repaired.

CONTROL PANEL (fig. 8)

The control panel has the following functions:

1.It includes the socket for the safety key. The safe- ty key also has an in-built engine protection. If the engine protection has been activated, remove the safety key and reset the engine protection (fig. 6).

2.It includes three lamps which indicate the bat- tery’s charge level:

AGreen = the battery is charged to between 30% and 100% of full capacity.

BYellow = the battery’s power has reduced. Be- tween 5% and 30% remains.

CRed = 5% or less of the battery power remains. The machine will begin to beep and will switch itself off automatically. Stop mowing and re- charge the battery once it has cooled down (after about 30 minutes). Do not use the mower again until the battery is fully charged.

Important: do not allow the battery power to com- pletely run down as this may damage the battery and shorten its operational life.

8211-3417-05 specifications

The Stiga 8211-3417-05 is a high-performance snow blower designed for residential use, especially effective in regions that experience heavy snowfall. This machine combines advanced engineering with user-friendly features, making it a reliable companion for homeowners needing to clear driveways and walkways during winter.

At the heart of the Stiga 8211-3417-05 lies its powerful engine, which provides the necessary torque and speed to handle thick and heavy snow. The machine features a robust clearing width, allowing users to tackle larger areas in a shorter time. This efficient design reduces the need for multiple passes, ultimately saving time and energy.

One of the standout features of the Stiga 8211-3417-05 is its two-stage snow throwing system. The first stage involves the auger, which quickly collects and moves the snow towards the impeller. The second stage uses the impeller to throw the snow up to 9 meters away, ensuring clear pathways and preventing snow from piling up around cleared areas. This feature is particularly beneficial for those dealing with heavy, wet snow that can be challenging for single-stage models.

The ergonomic design of the snow blower includes an adjustable handle, which enhances user comfort during operation. It’s crucial for long snow-clearing sessions, as it minimizes strain on the back and arms. Additionally, the machine offers intuitive controls within easy reach, ensuring that adjustments can be made on-the-fly without compromising safety.

Another innovative technology incorporated into the Stiga 8211-3417-05 is its continuous track system, which provides excellent stability and traction on slippery surfaces. This feature allows for better maneuverability in icy conditions, making it suitable for various terrains. The snow blower is also equipped with LED headlights, ensuring visibility even during early morning or late evening snow clearing.

Durability is a crucial aspect of the Stiga 8211-3417-05. Constructed with high-quality materials, this snow blower is built to withstand harsh winter conditions. Routine maintenance is made simpler with easy-to-access components, allowing users to keep the machine in optimal working condition throughout the winter months.

Overall, the Stiga 8211-3417-05 stands out as an effective and reliable snow clearing solution. Its combination of powerful performance, innovative features, and user-centric design makes it an excellent choice for anyone looking to combat winter's challenges efficiently. With this snow blower, users can expect a smoother, more manageable snow removal experience.

ENGLISH