Problem Possible causes | Stiga 8211-3417-05 specification

		ENGLISH	GB


	Problem	Possible causes

1. Mower does not start when safety		A. Check to make sure the safety key has been properly inserted and that the
	key is inserted and the safety han-	engine protection is pressed in.
	dle is pressed in	B. Remove safety key, turn mower over on side and check that blade is not
		obstructed.
		C. Is battery fully charged? Plug in charger and check lamps.

2.	Mower stops while mowing (for	A. The engine protection in the safety key has cut off power to protect
	reason other than releasing the	engine. Wait a couple of seconds for it to cool and then press in the
	safety handle).	engine protection.
		B. Remove safety key. Turn mower over and check that blade is free to turn.
		Also check deck and ejector for clogging.
		C. Mover is trying to cut too much grass. Raise it to higher cutting height
		and try to start again.
		D. Check to see if battery needs to be recharged.

3.	Mower vibrates excessively or	A. Remove safety key. Turn mower over to check if blade is properly tight-
	makes excessive noise.	ened.
		B. Remove safety key. Turn mower over to check if blade has been bent,
		damaged or worn out. Replace with an original blade.
		C. Remove safety key. Turn mower over to check mower deck for damage.
		If damaged, contact an authorised service dealer.
		D. If no visible damage to mower or blade, return mower to an authorised
		service dealer.

4. Mower runs but cutting perform-		A. Was battery fully charged at the start?
	ance is unsatisfactory and/or there	B. Remove safety key. Turn mower over to check if:
	is a loss of power while mowing.	-blade is correctly attached.
		-blade is sharp.
		-blade is bent, loose or damaged.
		-deck and/or ejector and/or grass collector are clogged
		C. Cutting height may be set too low, causing heavy strain on motor by try-
		ing to cut too much grass. Raise to a higher cutting position.

5. Mower is hard to push.		A. Mower is trying to cut too much grass (See problem 4, Cause C.)
		B. Remove safety key. Turn mower over to check if all wheels rotate freely
		and check them for damage. Obtain original replacement wheels from an
		authorised service dealer.

6. Mower engine will not stop when		A. Remove safety key to shut off motor. Mower can not then be started.
	the safety handle is released.	Contact an authorised service dealer.

7. Mower cannot finish cutting the		A. Was battery fully charged at the start?
	lawn on a single charge any more.	B. Mower is trying to cut too much grass (See problem 4, Cause C.)
		C. Contact an authorised service dealer for battery check.

8. Red lamp on charger does not		A. Wall outlet does not have power. (Verify with another electric device.)
	come on when charger is plugged	B. The charger fuse may need to be replaced. Contact an authorised service
	into wall outlet.	dealer
		C. Charger or cord may be defective. Contact an authorised service dealer.

If the mower still doesn't work, despite measures taken according to this table, contact an authorised service dealer.

8211-3417-05 specifications

The Stiga 8211-3417-05 is a high-performance snow blower designed for residential use, especially effective in regions that experience heavy snowfall. This machine combines advanced engineering with user-friendly features, making it a reliable companion for homeowners needing to clear driveways and walkways during winter.

At the heart of the Stiga 8211-3417-05 lies its powerful engine, which provides the necessary torque and speed to handle thick and heavy snow. The machine features a robust clearing width, allowing users to tackle larger areas in a shorter time. This efficient design reduces the need for multiple passes, ultimately saving time and energy.

One of the standout features of the Stiga 8211-3417-05 is its two-stage snow throwing system. The first stage involves the auger, which quickly collects and moves the snow towards the impeller. The second stage uses the impeller to throw the snow up to 9 meters away, ensuring clear pathways and preventing snow from piling up around cleared areas. This feature is particularly beneficial for those dealing with heavy, wet snow that can be challenging for single-stage models.

The ergonomic design of the snow blower includes an adjustable handle, which enhances user comfort during operation. It’s crucial for long snow-clearing sessions, as it minimizes strain on the back and arms. Additionally, the machine offers intuitive controls within easy reach, ensuring that adjustments can be made on-the-fly without compromising safety.

Another innovative technology incorporated into the Stiga 8211-3417-05 is its continuous track system, which provides excellent stability and traction on slippery surfaces. This feature allows for better maneuverability in icy conditions, making it suitable for various terrains. The snow blower is also equipped with LED headlights, ensuring visibility even during early morning or late evening snow clearing.

Durability is a crucial aspect of the Stiga 8211-3417-05. Constructed with high-quality materials, this snow blower is built to withstand harsh winter conditions. Routine maintenance is made simpler with easy-to-access components, allowing users to keep the machine in optimal working condition throughout the winter months.

Overall, the Stiga 8211-3417-05 stands out as an effective and reliable snow clearing solution. Its combination of powerful performance, innovative features, and user-centric design makes it an excellent choice for anyone looking to combat winter's challenges efficiently. With this snow blower, users can expect a smoother, more manageable snow removal experience.

ENGLISH

Problem

Possible causes

8211-3417-05 specifications