Gbenglish, Assembly | Stiga 500R-G, 500-G manual

GBENGLISH

•Wear tightly fitting clothes and heavy-duty shoes which completely cover the feet.

•The tank should only be half full when operat- ing on slopes. Petrol can leak out.

•The engine must be stopped in the following circumstances:

•When the machine is left unattended

•Before the machine is filled up with petrol

•Always make sure you have a good footing, es- pecially on slopes.

•Check that no one is in front of you or beside you when starting the blades. Keep a steady grip on the steering. The machine will lift when the rotors are started. Use extra caution when backing.

•Always keep at a safe distance to the rotors when working.

•Holding the steering correctly ensures a safe distance.

•No person must come closer than 20 m to the machine when working on slopes. The user must hold the steering firmly with both hands all the time.

•Working on stony or hard ground demands ex- tra attention from the operator. The machine be- comes more unstable.

•Never touch the engine when operating the ma- chine, or just afterwards. Risk for burn injuries.

2.4 AFTER OPERATING

•Allow the engine to cool before putting the ma- chine in a storeroom. Fire risk!

•Remove dirt and foreign material before putting the machine in a storeroom. The area round the petrol tank and muffler must be kept clean from leaves, oil, petrol or other foreign materials.

Fire risk!

•If the petrol tank is to be emptied, do this out- doors and when the engine is cold. Fire risk!

•The machine should be stored in a dry place. The machine must not stored with fuel in the tank in rooms where there are naked flames, sparks or other strong sources of heat.

2.5 MAINTENANCE

•Carry out maintenance regularly. All nuts and bolts should always be tight.

•Only use genuine spare parts which are in good condition. Spare parts must not be repaired. They must be replaced if they are defective. Poor quality spare parts can lead to personal in-

jury. If the muffler is damaged it must be re- placed.

•The engine must be stopped and the spark plug lead disconnected in the following circumstanc- es:

When adjusting the rotors.

When the machine is to be cleaned or repaired. When checking after a collision with a solid hard object. Carry out the necessary repairs be- fore continuing to work.

If the machine begins to vibrate abnormally. Carry out the necessary repairs before continu- ing to work.

•Wear protective gloves when working with the rotors.

3ASSEMBLY

3.1Auxiliary wheel

Install the auxiliary wheel (2:F) in the front hole and lock using the locking pin (2:A).

3.2 Depth skid

Install the depth skid (3:G) in the middle hole at the rear and lock using the locking pin (3:B).

3.3 Handle

Install the handle’s base (4:G) with handle (4:E) as follows:

1.Position the base (4:G) on the machine.

2.Remove the four screws (4) with the washers (4:H). Do not tighten the screws yet.

3.Hold the right and left handle (4:E ) in place and install using the two screws (4:F) with nuts and washers (4:C+D). Tighten the screws.

4.Set the handle to a comfortable working height and tighten the screws (4:H).

3.4 Throttle control

Install the throttle (1:A) on the left handle. See fig. 6.

3.5 Throttle cable

1.Install the throttle cable on the engine if not al- ready installed. See the engine supplier’s man- ual.

2.Install the cable in the throttle. See fig. 7.

500R-G, 500-G specifications

The Stiga 500-G and 500R-G are premium lawn mowers designed to revolutionize the mowing experience for homeowners and gardeners alike. These models emphasize efficiency, convenience, and advanced technology, making them ideal for maintaining lush, well-kept lawns.

One of the standout features of the Stiga 500-G and 500R-G is their powerful 500 series engines. The engines are designed for optimal performance, providing ample torque to handle various grass types and terrains. This power ensures that users can tackle larger plots of land without the frequent need for refueling or recharging, making the mowing process much more seamless and efficient.

Both models are equipped with advanced cutting technology. The blades are engineered for precision cuts, ensuring a clean finish that promotes healthy grass growth. The cutting width is substantial, allowing for a wider path with each pass. Users have the option to adjust the cutting height, which provides the flexibility to adapt to different grass length preferences, ensuring that the lawn is always maintained to perfection.

In terms of user convenience, both models incorporate ergonomic design elements. The handlebar is adjustable, allowing users to find their ideal height for comfort during operation. Additionally, the intuitive controls enable easy maneuverability, making it easier for users to navigate around obstacles in their yards.

One of the significant advancements in the 500R-G model is its robotic mowing capability. Equipped with intelligent programming, the 500R-G can be set up to autonomously maintain the lawn, freeing users from the manual labor of mowing. The machine uses sensors to navigate around flowerbeds, trees, and other obstacles, making it a flexible and hands-free solution for lawn care.

Both models also prioritize durability and ease of maintenance. With high-quality materials and robust construction, they are built to withstand harsh outdoor conditions. Furthermore, they feature easy-access points for maintenance tasks, such as spark plug changes or blade sharpening, ensuring that they remain in optimal working condition throughout their lifespan.

In summary, the Stiga 500-G and 500R-G combine powerful performance, advanced cutting technology, and user-friendly design. The incorporation of robotic mowing capabilities in the 500R-G model reflects a shift towards smart gardening solutions, positioning these mowers as leaders in the backyard equipment market. Whether for conventional mowing tasks or advanced robotic care, these models cater to the diverse needs of modern lawn enthusiasts.