Note: Read entire instruction sheet before you start installation and assembly.

WARNING

Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-865-2112.

This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions.

Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard- ware and components.

Never exceed the Maximum Load Capacity. See page 1.

If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an "edge to edge" stud finder is highly recommended.

Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.

This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

This product was designed and intended to be mounted to the following supporting surfaces checked below with the hardware included in this product as specified in the installation sheet. To mount this product to an alternative support- ing surface, contact Peerless customer care at 1 800 865-2112.

This product was designed to be installed on the following wall construction only;

WALL CONSTRUCTION

ADDITIONAL HARDWARE REQUIRED

x

Wood Stud

None

x

Wood Beam

None

x

Solid Concrete

None

x

Cinder Block

None

 

Metal Stud

Do not attach except with Peerless accessory kit for metal studs;

 

 

Contact Customer Service for Peerless accessory kit for metal studs.

 

Brick

Contact Customer Service

 

Other or unsure?

Contact Customer Service

Tools Needed for Assembly

stud finder ("edge to edge" stud finder is recommended)

phillips screwdriver

drill

5/32" bit for wood stud wall

1/4" bit for concrete and cinder block wall

11/16" bit for drywall

level

Accessories

2 piece Metal Stud Fastener Kit (ACC 215) (Metal Stud not evaluated by UL)

Table of Contents

 

Parts List

3

Pre-assemble shelf

4

Installation to Double Wood Stud Wall

5-6

Installation to Concrete or Cinder Block Wall

7

Installing Shelf

8

Installing Surge Protector

8

Installing Covers

8

2 of 24

ISSUED: 08-27-07 SHEET #: 083-9007-2 07-09-08

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.

Page 2
Image 2
Peerless Industries SCS221 manual Tools Needed for Assembly, Accessories, Table of Contents

SCS221 specifications

Peerless Industries SCS221 is a cutting-edge mounting solution designed for a variety of displays in both commercial and residential settings. This versatile product stands out in the market due to its sleek design, robust construction, and advanced features, making it a popular choice among AV professionals and installation experts.

One of the standout characteristics of the SCS221 is its exceptional adaptability. The mount is engineered to support a wide range of screen sizes, accommodating displays from 32 inches to 70 inches. This flexibility allows users to seamlessly integrate the mount into different environments, whether it be a conference room, lecture hall, or living room. The SCS221 also features tilt and swivel capabilities, providing optimal viewing angles while minimizing glare and reflections.

The mount's construction is another highlight. Made from high-quality steel, the SCS221 ensures durability and stability, even for heavier displays. Its robust design supports up to 100 pounds, giving users confidence that their display is securely mounted. Additionally, the powder-coated finish adds a layer of protection against scratches and other wear, ensuring the mount maintains its aesthetic appeal over time.

In terms of technology, the SCS221 incorporates an intuitive mounting system that simplifies installation. With clear instructions and all necessary hardware included, even those with minimal technical skills can achieve a secure setup. The mount also features integrated cable management solutions. This keeps wires organized and out of sight, contributing to a clean and professional appearance.

Another noteworthy aspect of the SCS221 is its compatibility with various VESA mounting patterns, including 600x400mm and smaller configurations. This ensures that users can easily mount a wide array of displays, making it a versatile solution across different brands and models.

In conclusion, the Peerless Industries SCS221 is an outstanding choice for anyone seeking a reliable, stylish, and technologically advanced display mount. With its sturdy construction, adaptable design, and ease of installation, it meets the needs of both commercial and residential users. Whether for business or pleasure, the SCS221 is engineered to enhance the viewing experience while ensuring lasting performance.