Peerless Industries SCS221 manual Skip to to install shelf

Installation to Double Wood Stud Wall (continued)

2-1	Insert two 1/4-20 x 3" screws (L) through wall plate (F). Thread two toggler wings (M) onto 1/4-20 x 3" screws (L)
	into the position shown in figure 2.1.

fig. 2.1

F

		M
	L	L	M
		F
2-2	Place wall plate (F) against wall while pushing toggler wings (M) through pre-drilled holes in wall as shown in
	figure 2.2. Level wall plate (F) and secure using two #14 x 2.5 wood screws (J). Pull forward on 1/4-20 x 3"

screws (L) until toggler wings (M) are flush against inside of drywall as shown in figure 2.4. While pulling backward on 1/4-20 x 3" screws, tighten toggler wings by turning clockwise until toggler wings are fully secured as shown in figure 2.2.1.

Skip to step 4 to install shelf		fig. 2.2.1
	F
		1	F
	M		L	M

	F	Pull back on screws (F) untill toggler wings (M) are flush
		against	drywall.
J		2	L

	F
M	While pulling back on screws, turn clockwise to tighten.
	3	F	M
L		L
fig. 2.2	Tighten screws	(L).

6 of 24	ISSUED: 08-27-07 SHEET #: 083-9007-2 07-09-08
Visit the Peerless Web Site at www.peerlessmounts.com	For customer care call 1-800-865-2112 or 708-865-8870.