![Pre-assemble Shelf](/images/new-backgrounds/17716/177167x1.webp)
Pre-assemble Shelf
1 | Insert nine button bumpers (E) into shelf base (A) | B | |
indicated by arrows as shown below. | |||
|
Place shelf glass (B) onto shelf base as shown right. Note: Be certain shelf glass does not cover screw insert holes on shelf base (A).
A
E
A
A
SCREW INSERT
HOLES
Insert three button bumpers (E) into shelf | |
| mounting plate (C). Attach shelf mounting plate |
(C) to shelf base (A) using two
Thread two | |
| shelf base (A), leaving 1/4" of exposed thread |
between the head of screw and shelf base as shown in figure 1.2.
Repeat steps 1 through
| WARNING |
| fig 1.2 |
|
• | Tighten screws so shelf mounting plate and glass are | N |
| |
1/4" |
| |||
| firmly attached, but do not overtighten. Overtightening |
| ||
|
|
| ||
| can damage glass or screws. |
|
|
|
fig. 1.1 |
| A | ||
|
| D |
|
|
| E | C |
|
|
|
|
|
| |
|
| A |
|
|
|
| 4 of 24 | ISSUED: | |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer care call |