Strong Pools and Spas Maui Spa owner manual Changing Filter Cycles, Troubleshooting

Page 9

Changing Filter Cycles

FILTRATION

Proper filtration is an important key to maintaining the clarity of your spa's water. The filter system is designed for unsurpassed effectiveness at removing debris and suspensions from the water anytime the water is circulating.

Your control panel is set to filter for two hours every twelve hours. A two speed pump is supplied with your spa that provides filtration on low speed, the low speed will shut off if the temperature creeps more than 2 degrees above the set point, it will turn back on when temperature drops to the set point.

The filter cycle begins six (6) minutes after the spa is energized. The second filter cycle begins 12 hours later. Filter duration is programmable for 2, 4, 6, 8 hours of for continuous filtration (indicated by FILC). The default filter time is 2 hours.

To program, press “Temp” then “Jets”. Press “Temp” to adjust. Press “Jets” to exit programming. The default filter time is 2 hours.

Troubleshooting

No power to spa:

1.Check proper connection of to pack

2.Check fuse in pack.

3.Must have very good ground connection - If none call tech support

Trips Breaker:

1.Make sure dedicated line:

2.Check breaker

3.First take note to how long runs before trips

Trips instantly

1.Mis-wired - check electrical wiring

2.Breaker replacement

3.Short in Ozone - unhook to check - call tech support

4.Short in pumps - unhook to check - call tech support

Trip after purge

1. Heater has short - check heater - call tech support

Poor Water Flow:

1.Clean filter

2.Check if adjustable jets (are all open)

3.May have air lock, prime pump by loosening top pump union.

4.If water diverted valves are present make sure they are all the way open.

5.If gate valves are present, make sure they are all the way open.

6.If none of this works possible line obstruction or impeller loose on pump drive shaft

No water or air flow to jet:

1.If adjustable jets, probably in off position. (At times can lock into position, may require some effort.)

2.Pinched line, cutting off flow before reaching spa.

3.Water diverter valve if present may be closed.

Air controls not working:

1.Remove cap on air valve, (with flat head screw driver) and make sure not broken or improper alignment.

2.If internals are broke, call tech support

7

Image 9
Contents STRONG-9 Table of Contents Maui Spa IntroductionDo not Operate SPA Without Correct Water Level Health SafetySpa Location Installation Spa placement220V Maui Electrical Connections Electrical General InstructionsJets Control Panel IdentificationStartup Preparations Powering SPAChanging Filter Cycles TroubleshootingFrom previous Freeze Protection Essential Chemicals and Their USE Spa MaintenanceWinterizing Warranties Safety Precautions / Danger Risk of Injury Points on Spa Safety for Strong Spas Spa OwnersRetain this Booklet for Future Reference

Maui Spa specifications

Strong Pools and Spas Maui Spa offers an exceptional experience for those seeking relaxation and rejuvenation. Located in the picturesque surroundings of Maui, this spa emphasizes not only luxury but also innovation in its design and services. The Maui Spa features state-of-the-art hydrotherapy systems that utilize the latest technologies to ensure a therapeutic and relaxing experience.

One of the standout characteristics of the Maui Spa is its commitment to promoting wellness through water therapy. The pools are designed with advanced filtration systems which ensure crystal-clear water while maintaining the highest hygiene standards. The hydrotherapy jets are strategically placed to target key muscle groups, providing a massage effect that alleviates stress and muscle tension. The temperature-controlled environments of both the indoor and outdoor spas offer guests the flexibility to enjoy their treatments year-round, regardless of the weather in beautiful Maui.

In addition to hydrotherapy, Strong Pools and Spas Maui Spa also offers various other features that enhance the overall experience. The ambiance is designed to calm the mind and soothe the senses, with soft lighting and nature-inspired décor creating a serene atmosphere. The spa incorporates natural elements such as stone and wood, which resonate with the tranquil Hawaiian landscape.

Advanced technologies further enhance the customer experience, including mobile app accessibility for booking treatments and managing appointments. This tech-driven approach ensures that guests can easily plan their spa days without hassle. Each treatment room is equipped with sound systems to provide personalized music playlists, allowing guests to customize their relaxation experience.

Moreover, Strong Pools and Spas emphasizes sustainable practices. They use eco-friendly materials in their construction and filtration systems that minimize energy use while maximizing performance. This commitment to sustainability reflects the local values of Maui, where nature and wellness coexist harmoniously.

Overall, Strong Pools and Spas Maui Spa stands out as a premier destination for anyone seeking relaxation, wellness, and innovative spa experiences. Whether you are opting for a soothing soak in their hot tubs or an invigorating massage, every aspect of the Maui Spa is engineered to promote well-being, making it a must-visit for both locals and tourists alike.