Strong Pools and Spas Maui Spa owner manual Spa Maintenance, Essential Chemicals and Their USE

Page 12

Spa Maintenance

The maintenance and care of your spa is simple and easy to carry out, and if performed regularly as scheduled, problems will be minimal. It is important that the following procedures be read through and carried out on a regular basis for the best, long term, overall performance of your spa.

The filtering cycle of your spa should be operated at least two hours or more a day (whether or not the heater is heating) to remove impurities and to prevent disposition of contaminants in your spa. The filtering system works automatically. Keep the spa covered when not in use to reduce the loss of heat and to keep debris from settling in the water.

Maintaining the spa's proper water chemical balance is essential to the comfort and safety of the user. Water mineral content varies constantly and is directly affected by evaporation and the use of cleaning and maintenance chemicals, which will increase mineral content, when added. If the mineral content deviates from prescribed pH level (7.2-7.8) deposits on the spa walls, filter, electric heating element or gas heater manifold and piping may adversely affect the condition of your spa equipment.

Since the water capacity of your spa is far less than that of a swimming pool, the chemical reaction caused by the presence of one or more persons in the spa is more rapid and pro- nounced. In other words, it is much more difficult to maintain the proper pH balance in a spa than in a swimming pool. For these reasons, it is important to check frequently, the total alka- linity of the water, the pH level, and the sanitize level, then add prescribed chemicals as nec- essary to maintain the proper chemical balance. Failure to maintain a proper balance of chemicals in your spa will result in an early, premature failure of your spa parts including, but not limited to, the spa cover, piping, certain electrical components in the spa, electrical control box and topside panel, thus voiding the warranty.

ESSENTIAL CHEMICALS AND THEIR USE

The following information on chemical use for spa maintenance is provided strictly as a guide for the spa owner and may or may not be appropriate to maintain your spa correctly and may, under certain conditions, be harmful to your spa and/or persons using the spa. Always check with your pool and spa dealer to determine which chemicals and/or proce- dures they recommend to maintain your spa correctly. STRONG POOLS & SPAS does hereby claim no responsibility or liability for use of and quantities of the chemicals listed.

CONCENTRATED CHLORINATING GRANULES - The minimum chlorine level in the spa should be at least 2PPM (parts per million). Chlorine level should be tested frequently and the chemical added to maintain a safe level of 2PPM. This type of chemical can be added in quantities of 0.5 ounce per 500 gallons of spa water. Check the chlorine level at least seven hours or more after adding to determine the full effect of the added chemical. Liquid chlorine is not recommended.

10

Image 12
Contents STRONG-9 Table of Contents Introduction Maui SpaHealth Safety Do not Operate SPA Without Correct Water LevelInstallation Spa placement Spa LocationElectrical General Instructions 220V Maui Electrical ConnectionsControl Panel Identification JetsPowering SPA Startup PreparationsTroubleshooting Changing Filter CyclesFrom previous Freeze Protection Spa Maintenance Essential Chemicals and Their USEWinterizing Warranties Points on Spa Safety for Strong Spas Spa Owners Safety Precautions / Danger Risk of InjuryRetain this Booklet for Future Reference

Maui Spa specifications

Strong Pools and Spas Maui Spa offers an exceptional experience for those seeking relaxation and rejuvenation. Located in the picturesque surroundings of Maui, this spa emphasizes not only luxury but also innovation in its design and services. The Maui Spa features state-of-the-art hydrotherapy systems that utilize the latest technologies to ensure a therapeutic and relaxing experience.

One of the standout characteristics of the Maui Spa is its commitment to promoting wellness through water therapy. The pools are designed with advanced filtration systems which ensure crystal-clear water while maintaining the highest hygiene standards. The hydrotherapy jets are strategically placed to target key muscle groups, providing a massage effect that alleviates stress and muscle tension. The temperature-controlled environments of both the indoor and outdoor spas offer guests the flexibility to enjoy their treatments year-round, regardless of the weather in beautiful Maui.

In addition to hydrotherapy, Strong Pools and Spas Maui Spa also offers various other features that enhance the overall experience. The ambiance is designed to calm the mind and soothe the senses, with soft lighting and nature-inspired décor creating a serene atmosphere. The spa incorporates natural elements such as stone and wood, which resonate with the tranquil Hawaiian landscape.

Advanced technologies further enhance the customer experience, including mobile app accessibility for booking treatments and managing appointments. This tech-driven approach ensures that guests can easily plan their spa days without hassle. Each treatment room is equipped with sound systems to provide personalized music playlists, allowing guests to customize their relaxation experience.

Moreover, Strong Pools and Spas emphasizes sustainable practices. They use eco-friendly materials in their construction and filtration systems that minimize energy use while maximizing performance. This commitment to sustainability reflects the local values of Maui, where nature and wellness coexist harmoniously.

Overall, Strong Pools and Spas Maui Spa stands out as a premier destination for anyone seeking relaxation, wellness, and innovative spa experiences. Whether you are opting for a soothing soak in their hot tubs or an invigorating massage, every aspect of the Maui Spa is engineered to promote well-being, making it a must-visit for both locals and tourists alike.